Yamaha 2100E - CRW - CD-RW Drive User Manual download pdf (Page 40)

6.12 Emulate x8

Under some conditions, you will have to reduce the

emulating speed of writer to eight-speed. Switch to “Emulate

x8”, all operation will be same as the “Emulate write” except

that the emulating speed will be 8x speed. (DVD+R disc is

not available under this function)

6.13 Burn in

This function is a burn-in test function. It will run the emulate

write function continuously. Between each cycle of emulate

write, the blank discs in writers will be ejected automatically

and re-insert again for continuous testing. There is no real

writing on the blank discs and the discs will remain blank as

original after test. (DVD+R disc is not available under this

function)

6.14 Update

Functions on duplicator will be improved for better

performance or for other reasons. This function will update

your firmware to the latest one. Load the data disc

containing the latest firmware data (BIOS disc) into

CD/DVD-ROM drive and the duplicator will find the data and

update its firmware automatically. During updating, don’t

turn off the power of machine since the update will not be

finished till machine tells you to restart the machine.

(

Turning off the machine during updating might cause

severe result such as no booting, etc.)

Procedures to make the BIOS data disc by yourself:

1. Get the BIOS firmware from Wytron through e-mail

([email protected]). Be careful not to use the wrong

firmware, as it will cause duplicator to hang up and not to

function correctly.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 48 49

No comments

Yamaha 2100E - CRW - CD-RW Drive User Manual Page 40