Yamaha 2100E - CRW - CD-RW Drive User Manual download pdf (Page 23)

6. Sub-function

In main menu, press and hold down the MODE switch for

five seconds till the da-da-da sound heard from the

controller, the menu will be switched to sub-function menu

and vice versa.

6.1 Setup

As there are different settings under the setup function to

control the duplicator’s operation, we suggest using the

original default settings for optimal operation. Changes

should be made only when you are fully familiar with the

function. Also please be noted that the function settings

listed below are summary for all possibility of devices

installed and might not exist in your duplicator.

6.1.1 Start Writers

This setting controls the number of writer that will work in

duplicator and normally it should be equal to the number of

writers installed in duplicator. Number of writers set is less

than that actually installed will limit the working writers. If 5

sets of writer are installed, for example, number setting of 2

will allow using only two writers at one time. Duplicator will

start the operation instantly when any 2 of the 5 installed

writers are ready (disc detected). The rest 3 writers will be

idle.

Press MODE will change the setting and press GO to bring

you to next setting.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 48 49

No comments

Yamaha 2100E - CRW - CD-RW Drive User Manual Page 23