Yamaha 2100E - CRW - CD-RW Drive User Manual download pdf (Page 27)

writers when job is done and you will have to eject discs

from the writers manually. “Pass” setting will only eject the

passed discs automatically and leave the failed ones in the

writers. Press MODE switch will eject those failed discs.

Press MODE to change the setting and GO to exit.

6.1.9 Buzzer

This setting controls ON and OFF of buzzer. Default setting

is “On”. Press MODE switch to change and GO to exit.

6.1.10 CD+G

This setting activates the copy capability of CD+G format. It

cannot be copied if the writers don’t support this format.

Default setting is “No”.

Press MODE switch to change and GO to exit.

6.1.11 CopyComp Eject

This setting controls the ejection of writers’ trays under “copy

+ compare” function. If the setting is “Yes”, the trays will eject

the passed discs after copying and it will re-insert the same

discs again for subsequent comparison. If setting is “No”, the

trays will not be ejected between copy and compare. The

default setting is “Auto” which means ejection of trays will

depend on the writers. If it supports auto-ejection, the tray

will be ejected after copying. If not, the tray will not be

ejected even when setting is “Yes”.

Press MODE switch to change and GO to exit.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

No comments

Yamaha 2100E - CRW - CD-RW Drive User Manual Page 27