Yamaha 2100E - CRW - CD-RW Drive User Manual download pdf (Page 29)

6.1.16 Startup Command

This setting specifies the first function appeared when

duplicator is turned on so as to avoid repeated selection all

the time.

Press MODE switch to change and GO to exit.

6.1.17 led offset

This setting controls the offset of position for LED display on

different kinds of SCSI case.

Press MODE switch to change and GO to exit.

6.1.18 lcd mile 2 digits

This setting controls the way of display for processing meter

during operation on LCD display, e.g. L12 C12 C12 C12 C12.

The “L” represents the “Load” and C represents the “Copy”

before the 2-digit number. If you set this option to “Yes”, the

L and C for the example above will disappear. Set “No” will

keep the display as above.

Press MODE switch to change and GO to exit.

6.1.19 CD to CD (if HDD installed)

This setting controls the source location of master data.

Select “Yes” to bypass the existing hard drive and you can

copy directly from CD/DVD to CD/DVD or select “No” to

copy CD/DVD from data stored in current partition of hard

drive. This option setting will not be saved and will be

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 48 49

No comments

Yamaha 2100E - CRW - CD-RW Drive User Manual Page 29