Yamaha 2100E - CRW - CD-RW Drive User Manual download pdf (Page 19)

5. Function

The functions explained below are based on factory’s default

setting. Different settings will cause duplicator to react

differently. Please press and hold down the MODE switch while

turning on the power till the “clear setup” message is shown on

the LCD; the duplicator will return to factory’s default setting as

a reset.

5.1 Copy

Make sure the present partition in hard drive is correct and

contains data (with hard drive installed) or the master disc

is loaded in the CD/DVD-ROM drive (without hard drive

installed) before copying. Place blank CD/DVD discs into

the writers, when all writers detect the CDs/DVDs,

duplicator will start copying automatically. When fewer

copies are required, place the required number of blank

CD/DVD discs into writers. Till you see a number “X” of

“X”start which matches the number of disc placed in the

writer(s), press the GO switch manually to start the

duplication.

When Copy is finished, those discs passed will be ejected

automatically and failed ones will be remained in writers.

Press MODE switch to eject failed discs. Put new

CDs/DVDs in the writers for additional copy. Duplicator can

also copy rewritable discs containing data if the writers are

capable of writing the rewritable discs. Data stored in

rewritable discs will be quickly erased automatically before

copying new data, no special setting or procedure required

to erase the old data.

5.2 Copy + Compare

This function will do copying and also comparing the

passed discs with the master. Under this function, the discs

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 48 49

No comments

Yamaha 2100E - CRW - CD-RW Drive User Manual Page 19