Yamaha RX-V3900 Manual download pdf (Page 36)

34 En

Optimizing the speaker setting for your listening room

Use this feature to optimize the setup of this unit for

multiple listening positions. You can also select the

parameters to be optimized by the automatic setup.

1 Turn on the video monitor and then connect

the optimizer microphone to the OPTIMIZER

MIC jack on the front panel.

2 Place the optimizer microphone at the first

listening position.

The following illustration shows how to place the

optimizer microphone in order to optimize the setup

of this unit for seven listening positions for example.

/2/3/4/5/6/7: Listening positions

3 Press IMENU on the remote control.

The GUI menu appears in the video monitor.

4 Press 9k to select “Setup Menu” and then

press 9h.

5 Press 9k / n repeatedly to select “Multi

Measure” and then press 9h.

6 Press 9k / n repeatedly to set the number of

listening positions and press 9l.

Choices: 1 (default), 2, 3, 4, 5, 6, 7, 8

7 To select the parameters to be optimized,

press 9k / n to select the parameter and

then press 9ENTER to check or uncheck

the box.

When you do not need to select the parameters to be

optimized, skip to step 8.

If you do not select the parameters to be optimized, this

unit will optimize the parameters you selected last time.

All the parameters are selected by the initial factory

settings.

8 Press 9l to return to the previous menu

level and then press 9n to select “Start”.

9 Press 9ENTER to start the measurement.

This unit starts to count down from 10 seconds.

• To start the measurement immediately, press 9ENTER

again.

• To cancel the automatic setup and return to the previous

screen, press 0RETURN.

Loud test tones are output from each speaker during

the measurement. Once all items for the first listening

position are measured, the following message

appears.

Advanced automatic setup

1 7

2 6

43 5

Information

Setup Menu

Start

Multi Measure 1

Wiring

Distance

Before proceeding next operation

Once you perform the next operation, this unit starts the

automatic setup procedure in 10 seconds. During the

automatic setup procedure, do not perform any operation on

this unit. For more accurate measurements, we recommended

that you get out of the room or move to the wall where

speakers are not around during the measurement.

Information

Setup Menu

Start

Multi Measure 7

Wiring

Distance

[ ]

Pre Check

Main Check

Wiring

Distance

Put the microphone at

2nd listening position

Next:ENTER

Skip:

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 429 430

Comments to this Manuals

No comments

Yamaha RX-V3900 Manual Page 36

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V3900