Yamaha RX-V3900 Manual download pdf (Page 35)

33 En

Optimizing the speaker setting for your listening room

PREPARATION

English

5 If you have finished the settings, press 9l

to return to the previous menu level and then

press 9n to select “Start”.

6 Press 9ENTER to start the measurement.

This unit starts to count down from 10 seconds.

• To start the measurement immediately, press 9ENTER

again.

• To cancel the automatic setup and return to the previous

screen, press 0RETURN.

Loud test tones are output from each speaker during

the measurement. Once all items are measured,

“Measurement Completed Successful” appears.

If an error or warning message appears, see “Error and

warning messages” (page 33).

7 Press 9ENTER to exit from the “Result”

screen.

• To view the measurement results in detail, press 9h.

Press 9k / n repeatedly to toggle between parameters

(page 36). Press 9l to return to the “Result” screen.

• To retry the measurement from step 4, press 9k.

8 Press 9l to save the measurement results

or 9h to discard them.

9 Press IMENU to turn off the GUI menu and

disconnect the optimizer microphone.

■ Error and warning messages

If an error or warning message appears during the

automatic setup procedure, carry out one of the following

operations. For details on each message, see “Automatic

setup” (page 123).

• To view the details on the error and warning messages,

press 9h. Press 9k / n to display the previous/next

page (if available). Press 9l to return to the previous

menu level.

• To return to the GUI menu, press 9l.

• To retry the measurement, press 9k.

• To ignore the message and continue the process, press

9n.

Some operations cannot be performed depending on the type of

error (or warning).

Distance

(Speaker distance)

This unit checks and adjusts the distance of

each speaker from the listening position and

adjusts the timing of each channel.

Size

(Speaker size)

This unit checks and adjusts the frequency

response of each speaker and sets the

appropriate low-frequency crossover for

each channel.

Equalizing

(Speaker

equalizing)

Parametric equalizer adjusts the level of the

specified frequency bands. This unit

automatically selects the crucial frequency

bands for the listening room and adjusts the

level of the selected frequency bands to

create a cohesive sound field in the room.

Level

(Speaker level)

This unit checks and adjusts the volume

level of each speaker.

Before proceeding next operation

Once you perform the next operation, this unit starts the

automatic setup procedure in 10 seconds. During the

automatic setup procedure, do not perform any operation on

this unit. For more accurate measurements, we recommended

that you get out of the room or move to the wall where

speakers are not around during the measurement. It takes

approximately 3 minutes.

Note

Parameter Descriptions

[ ]

Equalizing

Level

Result

Measurement Completed

Sucessful

Detail:

Exit:ENTER

Note

Pre Check

Main Check

Wiring

Retry

Exit Detail

E09:User Cancel

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 429 430

Comments to this Manuals

No comments

Yamaha RX-V3900 Manual Page 35

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V3900