Yamaha RX-V3900 Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 430
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
50 En
FM/AM tuning
Use this feature to store up to 40 stations FM/AM stations
(A1 to E8: 8 preset station numbers in each of the 5 preset
station groups). Preset the desired stations to this unit by
using the automatic or manual station preset.
Automatic station preset
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals in order.
Press and hold JBAND (or 8BAND) for more
than 3 seconds.
The MEMORY indicator flashes and “AUTO
MEMORY” appears in the front panel display. After
approximately 5 seconds, automatic presetting starts
from the current frequency and proceeds toward
higher frequencies.
When automatic preset tuning is completed, the
MEMORY indicator disappears.
y
To specify the preset group and number from which this unit
stores stations, press FPRESET/TUNING/CH l / h (or
9A-E l / h and 9PRESET/CH k / n) repeatedly after you
perform step 2.
To cancel the automatic station preset, press JBAND (or
8BAND) again.
Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after searching for
all the available stations.
Manual station preset
Use this feature to store the FM or AM stations manually.
1 Tune into a station.
See page 49 for tuning instructions.
2 Press GMEMORY (or 0MEMORY).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
y
To store the selected station under an empty preset number
automatically, press and hold GMEMORY (or
0MEMORY) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
To cancel the manual station preset, press GMEMORY
(or 0MEMORY) again.
3 To select the preset group and number (A1 to
E8), press FPRESET/TUNING/CH l / h
(or 9A-E l / h and 9PRESET/CH k / n)
repeatedly.
To select a higher preset station group and number,
press Fh (or 9k).
To select a lower preset station group and number,
press Fl (or 9n).
y
You can also select a preset number (1 to 8) by pressing
the numeric buttons (B).
If you select a preset number being used (“*” appears next
to the preset number), the current preset station will be
overwritten.
4 Press EENTER (or 9ENTER).
The preset station is set and the PRESET indicator
disappears.
The reception mode (stereo or monaural) is stored along with
the station frequency.
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE and then
press 3TUNER.
Preset FM/AM stations
Notes
MEMORY
A1 FM 88.90MHz
AUTO MEMORY
Flashes
Flashes
Note
PRESET
MEMORY A1
FM 88.90MHz
Lights up
PRESET
MEMORY C2
FM 88.90MHz
Preset station group and number
Page view 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 429 430

Comments to this Manuals

No comments