Yamaha MTX3 Manual download pdf (Page 150)

“Word Clock” dialog box Chapter 7. Dialog boxes

MTX Editor User’s Manual

150

❑ “Word Clock” dialog box

Here you can edit the word clock settings of the MTX system. Normally, these will be set to the

optimal values when you use the “Device Configuration Wizard” dialog box to create the

configuration. If you want to specify a Mini-YGDAI card as the word clock master etc., make

settings in this dialog box.

● [Preserve the Dante settings configured by Dante Controller]

check box

Select this check box if you’re using Audinate Corporation’s Dante Controller to set up

the Dante network. The settings of Dante Controller will take priority over the settings

made in MTX Editor. If this check box is cleared, you’ll be able to use MTX Editor to

make Dante network settings within the project.

● [Auto] button

Sets the word clock and master clock for all MTX systems in the project. This is

available only when offline.

● System select tabs

These select the MTX system whose word clock you will set.

● [System Word Clock Fs:] box

This specifies the word clock of the MTX system.

● [Advanced Setting] button

This switches the display to a screen where you can make advanced settings. The

illustration above shows the state when the [Advanced Setting] button has been clicked.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 200 201

No comments

Yamaha MTX3 Manual Page 150