Yamaha R-N803 Owner's Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 216
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
57 En
Troubleshooting
English
ADDITIONAL
INFORMATION
FM reception
AM reception (R-N803)
DAB reception (R-N803D)
Problem Possible cause Remedy
See
page
The FM radio
reception strength is
poor, and noise can
be heard.
The unit is receiving radio interference,
such as multipath reflections.
Change the antenna height, direction, or place of
installation.
The unit is receiving in a region located
far away from the radio station.
Press MODE on the front panel to select “MONO”
(monaural mode).
25
Use a commercially-available outdoor antenna.
The radio station
cannot be
automatically
selected.
The FM radio signal is weak. Use a commercially-available outdoor antenna.
Select the station manually.
25
Problem Possible cause Remedy
See
page
The AM radio
reception strength is
poor, and noise can
be heard.
The unit is picking up noise from sources
such as a fluorescent light or a motor.
In some environments, it may be difficult to
completely eliminate noise. However, using a
commercially-available outdoor antenna may help to
reduce noise.
The AM radio signal is weak. Change the direction of the AM antenna.
13
Select the station manually.
25
Use a commercially-available outdoor antenna.
Connect the supplied AM antenna to the
ANTENNA(AM) jack.
AM radio stations
cannot be registered
(preset).
The stations may have been registered
automatically (Auto Preset).
Auto presets can be used with FM radio stations
only. AM radio stations must be manually registered.
26
Problem Possible cause Remedy
See
page
Cannot tune into any
DAB stations.
The initial scan has not been performed. Perform the initial scan.
29
The DAB radio signal is weak. Change the antenna height, direction, or place of
installation.
13
There is no DAB coverage in your area. Check with your dealer or WorldDMB Online at
“http://www.worlddab.org” for a listing of the DAB
coverage in your area.
The initial scan is not
successful
(“NotFound” appears
on the front display).
The DAB radio signal is weak. Change the antenna height, direction, or place of
installation.
13
There is no DAB coverage in your area. Check with your dealer or WorldDMB Online at
“http://www.worlddab.org” for a listing of the DAB
coverage in your area.
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 215 216

Comments to this Manuals

No comments