Yamaha R-N803 Owner's Manual download pdf (Page 51)

45 En

Optimizing the speaker settings automatically (YPAO)

English

ADVANCED

OPERATION

Warning messages

If a warning message is displayed after the measurement, you can still save the measurement results.

However, we recommend you perform YPAO again in order to use this unit with the optimal speaker settings.

Note

• If more than one warning is detected, use the cursor keys (B / C) to check another warning message.

• To return to the previous state after checking the warning message, press the cursor key (

D)).

Warning message Cause Remedy

W-1 Out of Phase

A speaker cable may be connected with the

reverse polarity (+/-).

check the cable connections (+/–) of the

speakers.

If the speaker is connected incorrectly, turn off

this unit and then reconnect the speaker cable.

Depending on the type of speakers or room

environment, this message may appear even if

the speakers are connected correctly. In this

case, you can ignore the message.

W-2 Over Distance

A speaker is placed more than 24 m (80 ft) from

the listening position

Move the speaker within 24m (80 ft) of the

listening position.

W-3 Level Error

There are significant volume differences

between the speakers.

Check the usage environment and cable

connections (+/–) of each speaker, and the

volume of the subwoofer. We recommend using

the same speakers or speakers with

specifications that are as similar as possible.

Out of Phase

YPAO W-1

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 215 216

No comments

Yamaha R-N803 Owner's Manual Page 51