Yamaha DTXPLORER Specifications download pdf (Page 25)

TRIG2 ¡snare 0%

–Type= TP1/SnrA‚

Previous page icon

Tr igger Input you want to edit

Next page icon

Flashing cursor

(the item you want to edit)

Completed!

3. Rotate the jog dial to change the setting.

* An asterisk “*” will appear next to “TRIG” in the display if

data is changed. This asterisk will disappear after the store

operation is carried out.

* The Trigger Input Level produced when the pads are hit is

given on the upper right side in the display. When setting the

gain, use this level as a guide to measure how hard the

pads are being hit.

4. To save changes you’ve made to the data, use the proce-

dure described below to store the data in User Trigger Setup

(No. 5).

* If a different trigger setup is selected before carrying out the

store operation, all changes you have made to the data will

be lost.

4-1. Press the [SAVE/ENT] button. The following display will

appear.

4-2. Press the [SAVE/ENT] button again and the following

display asking your confirmation to proceed with the store

operation.

4-3. Press the [SAVE/ENT] button to carry out the store op-

eration.

*To cancel the store operation, press any button except

for the [SAVE/ENT] and [SHIFT] buttons (when “Are you

sure?” appears in the display, the jog dial will also can-

cel the operation).

The following display appears after the store operation is

complete.

TRIG1 Trigger Setup Select

[Range] 1 to 5

Selects the Trigger Setup Type. (P. 24)

TRIG2 Type (Pad Type)

Sets the type of pad that is connected to the assigned input jack

shown in the upper half of the display ([1 SNARE] in the example

shown above).

*Values set in [TRIG3 Gain, MVl (Mininimum Velocity)] (P. 26)

and [TRIG5 SelfRejTime (Self Rejection Time)] (P. 26) will auto-

matically select the proper value for the pad type you set here.

Pad types are defined as follows.

KP KP80S/80/65/60

TP1/SnrA TP65S/65 (mainly used as a snare pad) *1

TP1/SnrB TP65S/65 (mainly used as a snare pad) *1, *2

TP1/Tom TP65S/65 (mainly used as a tom pad) *1

TP2-A TP80S/80/65/60 *3

TP2-B TP80S/80/65/60 *3

PCY1 PCY150S

PCY2 PCY130S/130

PCY3 PCY80S/80/65/60/10

RHH RHH130

RHP Pad RHP120SD/120/100/80 (pad side) *4

RHP Rim RHP120SD/120/100/80 (rim side) *4

RHP Kick KP120

BP BP80 *5

DT Snare DT series drum trigger (for a snare drum)

DT HiTom DT series drum trigger (for small toms)

DT LoTom DT series drum trigger (for large toms)

DT Kick DT series drum trigger (for bass drum)

misc 1

to 6 Another manufacturer’s pad 1 to 6.

*1 3-zone function (pad voice x1, rim voice x2) is available to a 3-

zone compatible pad such as the TP65S, etc., if it is connected

to the 1 SNARE input.

When connected to the 5 RIDE or 6 CRASH jacks, the rim will

produce only one voice. For produc-

ing closed rim shots, the [TP1/

SnrA] has a high sensitivity setting

on rim 1, while the [TP1/SnrB] has

a high sensitivity setting on rim 2.

Left and right rim sensitivity is set

at the same level for [TP1/Tom]. If

the pad is connected to any other

input, the rim voice will not be pro-

duced and the pad will only produce

one voice.

Rim 2

TRIG1

1 :Medium ‚

TRIG2 ¡snare 0%

–Type= TP1/SnrA‚

Trigger Setup Edit

TRIG2*¡snare 0%

–Type= TP1/SnrB‚

Tr igger Input Level

TRIG save to 5

Are you sure ?

Store

Destination

Rim 1

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Yamaha DTXPLORER Specifications Page 25

Comments to this Manuals

Related products and manuals for Music drums Yamaha DTXPLORER