Yamaha DTXPLORER Specifications download pdf (Page 10)

Connections

■ Connecting to Speakers or Headphones

The DTXPLORER is not equipped with built-in speakers. The unit

must be connected to an external amp + speaker system or head-

phones for sound output.

CAUTION

Whenever making connections, make sure that the

cable being used is equipped with a plug that corre-

sponds to the jack type on the specific device.

● OUTPUT L/MONO, R Jack (Monaural Standard Phone

Jack)

With these jacks you can connect the DTXPLORER to a mixer or

audio equipment to produce sound from external speakers, or con-

nect the DTXPLORER to audio recording equipment for record-

ing your own performance.

* Use the DTXPLORER’s OUTPUT L/MONO jack when connect-

ing to a device with a monaural input.

● PHONES Jack (Standard Stereo Phone Jack)

Use the VOLUME knob on the rear panel to adjust headphone

volume.

Whenever using headphones, take care not to damage your

hearing. Use the equipment with the volume adjusted to a

comfortable level.

Headphones

Monitor system for the DTX series

MS100DRJ, MS50DRJ, etc.

PHONES jackOUTPUT L/MONO and R jacks

● Some Advice On Connections

•Trigger Input jacks 5 RIDE and 6 CRASH are stereo input

type jacks. These jacks can be connected to switch equipped

pads such as the TP65S, PCY65S, PCY130S, etc.

• 3-Zone pads like the TP65S, PCY150S, etc., can be con-

nected to Trigger Input jack 1 SNARE.

•Pad sensitivity is set in the Trigger Setup Edit’s [TRIG2

Type (Pad type)] setting (P. 25).

• Using the supplied stereo cable to connect the KP65 kick

pad to the main unit allows the connection of an additional

pad to Input jack 9 via the external pad input jack on the

KP65.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Yamaha DTXPLORER Specifications Page 10