Yamaha DTXPLORER Specifications download pdf (Page 8)

1 SNARE1 SNARE 2 TOM 12 TOM 1 3 TOM 23 TOM 2 4 TOM34 TOM 3

DC IN 12VDC IN 12V

5 RIDE5 RIDE

PHONESPHONES

6 CRASH6 CRASH 7 HI HAT7 HI HAT 8 KICK/98 KICK/9

MIDI

OUT

MIDI

OUT

HI HAT

CONTROL

HI HAT

CONTROL

AUX INAUX IN VOLUMEVOLUME

STANDBY

L/MONOL/MONORR

MIN MAX

Nomenclature

Rear Panel

!1 MIDI OUT Jack

This jack is used to send data from the DTXPLORER to an exter-

nal MIDI device.

With this jack, you can use the DTXPLORER as a control device

to trigger voices from an external tone generator, or synchronize

the DTXPLORER’s song or metronome playback with the play-

back of an external sequencer. (P. 11)

!2 Trigger Input Jacks (1 SNARE thru 7 HI HAT)

These jacks are used to connect the pads or trigger sensors to the

main unit. Connect pads such as snare, tom, etc., according to the

indication below each input. (P. 9)

3-zone jack .................................... 1 SNARE jack

Stereo (w/switch) jacks ................. 5 RIDE, 6 CRASH jacks

Monaural jacks .............................. 2 TOM1, 3 TOM2, 4 TOM3,

7 HI HAT jacks

!3 Trigger Input jack (8 KICK/9)

This jack is used to connect the kick pad to the main unit.

Using the supplied stereo cable to connect the KP65 kick pad to

the main unit allows the connection of an additional pad to Input

jack 9 via the external pad input jack on the KP65.

!4 Hi-Hat Controller Jack (HI HAT CONTROL)

This jack is used to connect a hi-hat controller. (P. 9)

*Use a cable with a stereo plug (shown below) when connecting

a Hi-hat controller.

!5 Output Jacks (OUTPUT L/MONO, R)

These jacks are used to connect the DTXPLORER to an external

amplifier, mixer, etc. For monaural playback use the L/MONO jack.

For stereo playback connect both L/R jacks.

!6 Head Phone Jack (PHONES)

Connect a pair of headphones to this jack to monitor the

DTXPLORER. (P. 10)

!7 AUX IN Jack

Connect the output of an external audio device, etc., to this jack

(stereo mini jack). (P. 10)

This is convenient for playing along with music from a CD or cas-

sette player.

* Use the volume control on the external device (CD, cassette

player, etc.) to adjust the volume balance.

!8 Master Volume (VOLUME)

Adjusts the DTXPLORER’s overall volume (output level of the

signal delivered by the OUTPUT jacks and PHONE jack).

Rotate the knob clockwise to increase volume, and counter-clock-

wise to decrease.

!9 Power Supply Jack (DC IN 12V)

Connect an AC adaptor to this jack. To prevent the adaptor from

becoming unplugged, secure the cord to the cord hook @0.

@0 Cord Hook

Prevents the power cord from accidentally becoming unplugged.

(P. 11)

@1 Power Switch (POWER)

This is the DTXPLORER’s power switch.

Double Insulator

!4!3

!6 !7 !8

!9 @0 @1

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments

Yamaha DTXPLORER Specifications Page 8

Comments to this Manuals

Related products and manuals for Music drums Yamaha DTXPLORER