Yamaha DTXPLORER Specifications download pdf (Page 20)

The DTXPLORER lets you create your own original drum kit by assigning drum voices to the pads

and setting their tuning, voice, decay, reverb, etc.

1. Select a Drum Kit

Press the [DRUM KIT] button to view page 1 in Drum Kit

Select (KIT1).

Rotate the jog dial to select the drum kit you would like to use

as a starting point for your original drum kit. We recommend

that you select a drum kit that is close to the type of kit you

would like to create.

* Preset drum kits (No. 1 to 32) and user drum kits (No. 33 to

42) can be used for editing as well.

2. Assign Drum Voices

In this example, we’ll create a bass drum (kick) sound.

2-1. Press the [<]/[>] buttons to view page KIT2 in Drum

Voice Select.

2-2. To select the pad you want to edit (Trigger Input Source),

simply hit the pad you’d like to edit, or press the [SHIFT]

+ [<]/[>] buttons.

Step on the kick pedal or press the [SHIFT] + [<]/[>]

buttons and select “

•kick”. Now the pad that is con-

nected to the 8 KICK Trigger Input Jack is selected or in

other words, the kick pedal’s pad input is selected.

Create Your Own Original Drum Kit

● About the Trigger Input Sources

Sets the voice for each input source of the pad.

The Input Source is trigger data that is transmitted by the

pads or trigger sensors connected to input jacks 1 to 9 of the

DTXPLORER.

When monaural pads TP60/65/80, KP60/65/80, PCY60/65/

80/130, DT10/20, etc. are used, one Input Source will be as-

signed to one input jack.

When stereo pads TP65S/80S, PCY65S/80S/130S, etc. are

used, two Input Sources (pad input and rim switch input or 2

kinds of pad input, etc.) will be assigned to one input jack.

When a 3-zone pad such as the TP65S/PCY150S, etc., is used,

three Input Sources (pad input and two rim switches, etc.)

will be assigned to one input jack.

To select the pad (Trigger Input Source), simply hit the target

pad, or press the [SHIFT] + [<]/[>] buttons.

Each Input Source is defined as follows.

¡snare Pad input for Trigger Input Jack 1.

¡snrR1 Rim switch 1 input for Trigger Input Jack 1.

¡snrR2 Rim switch 2 input for Trigger Input Jack 1.

™tom1 Pad input for Trigger Input Jack 2.

£tom2 Pad input for Trigger Input Jack 3.

¢tom3 Pad input for Trigger Input Jack 4.

Øride Pad input for Trigger Input Jack 5.

ØrideE Edge switch input for Trigger Input Jack 5.

§crash Pad input for Trigger Input Jack 6.

§crashE Edge switch input for Trigger Input Jack 6.

¶open Pad input (when the hi-hat controller is not fully

closed) for Trigger Input Jack 7.

¶close Pad input (when the hi-hat controller is fully

closed) for Trigger Input Jack 7.

¶footCl Event when the hi-hat controller is depressed for

Trigger Input Jack 7.

¶splash Splash event for the hi-hat controller for Trigger

Input Jack 7.

•kick Pad input for Trigger Input Jack 8.

ªpad9 Pad input for Trigger Input Jack 9.

* Monaural pads do not have a rim switch function.

KIT1 _________

1 :Acoustic ‚

KIT2 ¡snare

–K/001 Maple 22‚

KIT2 •kick

–K/001 Maple 22‚

Pad being edited

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Yamaha DTXPLORER Specifications Page 20

Comments to this Manuals

Related products and manuals for Music drums Yamaha DTXPLORER