Yamaha 2100E - CRW - CD-RW Drive User Manual download pdf (Page 34)

at “Begin track” and press once again GO at “End track” to

exit. Duplicator will start loading those music tracks selected

into the current partition of hard drive. After finishing loading,

the master disc will be ejected automatically and LCD will

display the message of “Pass”. You may change the master

disc and run the Edit function again to gather more music

tracks from different master discs. When finishing the

collection, switch the function to Copy and place blank

CD/DVD discs into writers for copying.

If there is no hard drive installed and when selection of

music tracks from the master disc in CD/DVD-ROM drive is

completed, the duplicator will prompt you the message:

Finalize

[+] No [Quit]

If there are still other tracks need to be collected, the setting

of Finalize must be “No”. Press GO switch to quit and the

duplicator will start to copy directly the selected tracks onto

blank discs. After finishing the copy, the master disc will be

ejected automatically and prompt you “Pass” in the LCD

display. You will note that the target discs in writers will not

be ejected at this moment. You can change another master

disc in the CD/DVD-ROM drive. Duplicator will analyze the

master disc and bring you to the “Begin track” message on

LCD again. You can repeat the procedures described above

to collect more tracks from another master disc. If this

master disc is the last one that you collect, change the

setting of Finalize to “Yes” and press GO switch, duplicator

will start to copy and close the target discs in the writers. If

all of discs pass copying, they will be ejected from the

writers automatically.

Please study the following examples carefully and follow the

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 48 49

No comments

Yamaha 2100E - CRW - CD-RW Drive User Manual Page 34