Yamaha RX-V1800 Manual download pdf (Page 79)

77 En

Customizing this unit (MANUAL SETUP)

ADVANCED

OPERATION

English

Use this feature to manually adjust the basic speaker

settings. Most of the “BASIC MENU” parameters are set

automatically when you run the automatic setup.

Set “TEST TONE” to “ON” to output the test tone for the

“SPEAKER SET”, “SPEAKER LEVEL” and “SP DISTANCE”.

■ Speaker settings A)SPEAKER SET

LFE/bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR, FRONT, BOTH

When a subwoofer is connected to this unit

and you want to get natural bass sound:

Select “SWFR” (subwoofer). The LFE signals as well

as the low-frequency signals of other speakers set to

“SML” (or “SMALL”) are directed to the subwoofer.

When a subwoofer is connected to this unit

and you want to get rich bass sound:

Select “BOTH” (both). The low-frequency signals of

any source are output from the subwoofer. The LFE

signals as well as the low-frequency signals of other

speakers set to “SML” (or “SMALL”) are directed to

the subwoofer. The low-frequency signals of the front

left and right channels are directed to the front left and

right speakers and the subwoofer regardless of the

“FRONT SP” setting.

When you do not use a subwoofer:

Select “FRONT” (front). The LFE signals, the

low-frequency signals of the front left and right

channels, and the low-frequency signals of other

speakers set to “SML” (or “SMALL”) are all directed

to the front left and right speakers regardless of the

“FRONT SP” setting.

Front speakers FRONT SP

Choices: SMALL, LARGE

When the front speakers are large:

Select “LARGE” (large).

When the front speakers are small:

Select “SMALL” (small).

• When “LFE/BASS OUT” is set to “FRONT”, the LFE signals

found in bitstream sources, the low-frequency signals of the

front left and right channels, and the low-frequency signals of

other speakers set to “SML” (or “SMALL”) are all directed to

the front left and right speakers regardless of the “FRONT SP”

setting.

• When “LFE/BASS OUT” is set to “FRONT”, you can select

only “LARGE” in “FRONT SP”. If the value of “FRONT SP” is

set to other than “LARGE” in advance, this unit change the

value to “LARGE” automatically.

Center speaker CENTER SP

Choices: NONE, SMALL, LARGE

When the center speaker is large:

Select “LARGE” (large).

When the center speaker is small:

Select “SMALL” (small).

When you do not use the center speaker:

Select “NONE” (none). The center channel signals are

directed to the front left and right speakers.

1 BASIC MENU

[]/[]:

[ENTER]:

[

1 BASIC MENU

A)SPEAKER SET

B)SPEAKER LEVEL

C)SP DISTANCE

D)TEST TONE

UP/DOWN

Enter

A)SPEAKER SET

LFE/BASS OUT

SWFR FRONT>BOTH

Measure for the speaker size

The woofer section of a speaker is

– 16 cm (6.5 in) or larger: large

– smaller than 16 cm (6.5 in): small

Notes

A)SPEAKER SET

FRONT SP

SMALL >LARGE

A)SPEAKER SET

CENTER SP

NONE >SMALL LARGE

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 564 565

Comments to this Manuals

No comments

Yamaha RX-V1800 Manual Page 79

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1800