Yamaha YRS-2100 Manual download pdf (Page 29)

27 En

Playback features

PREPARATION

CONNECTION/

INITIAL SETTINGS SETTINGS

TROUBLESHOOTING

ABOUT THIS UNIT EnglishPLAYBACK

Use this feature to automatically set this unit to the standby mode

after a specified period of time.

■ Auto power down function

When AutoPowerDown is set, the unit is turned to standby mode

automatically after 10 minutes from the selected input source is

turned off or in standby mode. This function is useful to prevent

you from forgetting to turn off the unit.

Set according to each input (TV/HDMI1-3/INPUT1-3/DOCK).

Available menu items vary depending on the selected input.

Option menu items

The following menu items are provided for each input.

The option menu items are listed below. These settings are

applied to the currently selected input source. The default settings

are marked with “*”.

■ Adjusting input level of each jack

(Volume Trim)

Adjust the input level for each jack to compensate for variations

in volume between different input devices.

Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB

■ Switching the audio signal to play back

(Decoder Mode)

Use to select digital audio signals for playback.

Selectable item: Auto*, DTS

Auto: This unit automatically selects the audio signal for

playback. Normally select this mode.

DTS: This unit plays back only DTS signal.

■ Setting the surround decoder (Sur. Dec.

Mode)

Refer to “Enjoying sound with your preference” (☞p. 21) for

details.

Sleep timer/auto power down function

Press SLEEP key repeatedly.

Switching the time it takes to switch to standby mode. The

SLEEP indicator (☞p. 47) flashes in the front panel display.

The SLEEP indicator in the front panel display lights up and the

sleep timer is set.

Selectable item: Sleep 120 min., Sleep 90 min., Sleep

60 min., Sleep 30 min., AutoPowerDown, Off

Settings for each input source (Option menu)

Press input key ( , , , ) to select

the input you want to change the setting.

Press OPTION key.

The option menu is displayed on the front panel display.

Select the items by pressing U/ V

key, then press ENTER key.

Change setting value by pressing Y/Z

key.

To exit the option menu, press OPTION

key.

; Volume Trim

Input source Menu items

HDMI1-3 Volume Trim, Decoder Mode, Sur. Dec. Mode,

Signal Info

INPUT1-3

DOCK

Volume Trim, Sur. Dec. Mode, Connect,

Disconnect, Pairing, Interlock

• The sleep timer setting is canceled if this unit is set to the standby

mode or “Off” is selected.

• When AutoPowerDown is set, SLEEP indicator does not light up

while the input source component is turned on.

• If the unit is operated during the 10 minutes before entering standby

mode, the unit does not enter standby mode until 10 minutes after the

latest operation.

• AutoPowerDown cannot be selected when:

– analog (INPUT3) or DOCK is selected.

– TV or HDMI1-3 is selected and HDMI control function is on.

For details on Interlock, refer to “Playing back iPod/iPhone (☞p. 29)”.

For details on Connect, Disconnect and Pairing, refer to “Playing back

Bluetooth components (☞p. 30)”.

2) y

3) y

4) y

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 454 455

Comments to this Manuals

No comments

Yamaha YRS-2100 Manual Page 29

Comments to this Manuals

Related products and manuals for Receiver Yamaha YRS-2100