Yamaha YRS-2100 Manual download pdf (Page 39)

37 En

Setup menu

PREPARATION

CONNECTION/

INITIAL SETTINGS PLAYBACK SETTINGS

TROUBLESHOOTING

ABOUT THIS UNIT English

Sub menu: HDMI1-3

Manually adjust the audio output delay applied to signals input

from the HDMI IN jacks. This setting is effective only when

“AUTO LIP SYNC” is set to “OFF”.

Adjustable range: 0 ms to 30 ms* to 300 ms

Sub menu: INPUT1/INPUT2/INPUT3

Adjust the audio output delay applied to signals input from the

INPUT1/INPUT2/INPUT3 jacks.

Adjustable range: 0 ms to 30 ms* to 300 ms

SOUND SETUP  Dynamic Range Control

Use to adjust the dynamic range compression. Dynamic range is

the difference between the smallest sound that can be heard above

the noise of the equipment and the biggest sound that can be

heard without distortion.

Sub menu: Adaptive DRC

Select whether to automatically adjust the dynamic range in

conjunction with the volume level. When this function is set to

“ON”, the dynamic range is adjusted as follows.

When the volume level is low:

Narrow the dynamic range. Loud sound is played back softer, and

soft sound which is hard to be listened to is played back louder.

When the volume level is high:

Widen the dynamic range. From soft sound to loud sound, source

sound is played back without adjusting volume.

Selectable item: ON*, OFF

“ON”: Adjust dynamic range automatically.

“OFF”: The dynamic range is not adjusted automatically.

Sub menu: Dolby/DTS DRC

Select the amount of dynamic range applied when this unit is

decoding Dolby Digital and DTS signals.

Selectable items: Min/Auto, Standard, Max*

Max: Outputs sound without adjusting the dynamic range of the

input signals.

Standard: The dynamic range recommended for regular home

use.

Min/Auto:

(Minimum) Adjust the dynamic range for low volume or a quiet

environment, such as at night, for playing back bitstream signals

except for Dolby TrueHD signals.

(Auto) Adjust the dynamic range based on information from the

input signal when playing back Dolby TrueHD signal.

SOUND SETUP  CHANNEL LEVEL

Use to adjust the volume of each channel with test tones.

Sub menu:

Front L, Front R, Center, Surround L, Surround R,

Subwoofer

Adjustable range: -10.0 dB to +10.0 dB

SOUND SETUP  SOUND OUT

Sub menu: CHANNEL OUT, SURROUND

Use to configure the number of output channels (5.1ch/7.1ch/

Auto) or audio output method. For details, see “Changing the

audio output method for surround playback” (☞p. 23).

Dynamic range control

Output level

Off

Input level Input level

Volume : low Volume : high

Volume level of each channel with test tones

Sound out setting

Sound beam output configuration

• When set to “ON”, “Dolby/DTS DRC” is automatically set to “Max”.

• This setting is not available when the UniVolume is set to “ON”.

This makes the sound easier to hear when listening at low volume at

night, for example.

“Adaptive DRC” is automatically set to “OFF” when the settings other

than “Max” is selected.

When using My Surround function, Center, Surround L/R, Subwoofer

can be selected.

3) y

4) y

5) y

6) y

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 454 455

Comments to this Manuals

No comments

Yamaha YRS-2100 Manual Page 39

Comments to this Manuals

Related products and manuals for Receiver Yamaha YRS-2100