Yamaha RST90K Owner's Manual download pdf (Page 28)

5-10

ESU00039

Headlight beam switch

Push the headlight beam switch to change the headlight

beam to high or low.

Headlight beam switch

Push

High beam

Low beam

ESU04300

Auxiliary DC jack

The auxiliary DC jack is located in the front panel and

can be used for accessories.

NOTE:

The auxiliary DC jack cannot be used if the engine is not

running.

1. Start the engine.

2. Open the auxiliary DC jack cap

, and then insert

the accessory power plug into the jack

NOTE:

After using the auxiliary DC jack, be sure to remove the

accessory power plug from the jack and close the auxil-

iary DC jack cap.

CAUTION

●

Do not use accessories requiring more than the

maximum rated capacity for the auxiliary DC jack.

This may overload the circuit and cause the fuse

to blow. (See pages 8-31 – 8-32 for the specified

amperage.)

●

Do not use an automotive cigarette lighter or

other accessory with a plug that gets hot

because the jack can be damaged.

Maximum rated capacity:

DC 12 V, 2.5 A (30 W)

U8ET10.book Page 10 Monday, June 14, 2004 5:42 PM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 98 99

No comments

Yamaha RST90K Owner's Manual Page 28