5-3
ESU04151
Throttle override system (T.O.R.S.)
If the carburetor or throttle cable should malfunction dur-
ing operation, the T.O.R.S. will operate when the throttle
lever is released.
The T.O.R.S. is designed to interrupt the ignition and
keep the engine speed between 2,800 and 3,000 r/min if
the carburetor fails to return to idle when the lever is
released.
WARNING
@
●
If the T.O.R.S. is activated, make sure that the
cause of the malfunction has been corrected and
that the engine can be operated without a prob-
lem before restarting the engine.
●
Be sure to use the specified spark plug and spark
plug cap. Otherwise, the T.O.R.S. will not work
properly.
@
CA-19E
È
Idling/starting
É
Running
Ê
Tr o u b l e
1
Throttle position sensor (throttle valve position)
2
Throttle switch
3
Throttle cable
a
On
b
Off
c
Open
d
Closed
NOTE:
@
When the T.O.R.S. is activated, the warning light
4
and
self-diagnosis warning indicator
5
will flash and the two-
digit code “84”
6
will flash in the tripmeter/odometer dis-
play.
@
A
B
C
Mode
Item
Idling/
starting
Running Trouble
Throttle switch Off On Off
Throttle position
sensor
Closed Open Open
Engine Run Run
T.O.R.S.
will operate
A
B C
U8ET10.book Page 3 Monday, June 14, 2004 5:42 PM
Comments to this Manuals