Yamaha RST90K Owner's Manual download pdf (Page 65)

8-11

7. Remove the oil filter cartridge

with an oil filter

wrench.

NOTE:

An oil filter wrench is available at a Yamaha dealer.

8. Apply a thin coat of engine oil to the O-ring of the new

oil filter cartridge.

9. Install the new oil filter cartridge with an oil filter

wrench, and then tighten it to the specified torque.

10. Install the engine oil drain bolts, and then tighten

them to the specified torques.

11. Add 2.0 L (1.8 Imp qt, 2.1 US qt) of the recom-

mended engine oil to the oil tank, and then install and

tighten the oil level gauge/dipstick and the cylinder

head cap.

12. Start the engine, warm it up for several minutes, and

then turn it off.

Tightening torque:

Oil filter cartridge:

17 Nm (1.7 m·kgf, 12 ft·lb)

Tightening torques:

Crankcase engine oil drain bolt:

10 Nm (1.0 m·kgf, 7.2 ft·lb)

Oil tank engine oil drain bolt:

16 Nm (1.6 m·kgf, 11 ft·lb)

Recommended engine oil:

See page 6-2.

Oil quantity:

With oil filter cartridge replacement:

3.0 L (2.6 Imp qt, 3.2 US qt)

Without oil filter cartridge replacement:

2.8 L (2.5 Imp qt, 3.0 US qt)

Total amount:

3.7 L (3.3 Imp qt, 3.9 US qt)

U8ET10.book Page 11 Monday, June 14, 2004 5:42 PM

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 98 99

No comments

Yamaha RST90K Owner's Manual Page 65