8-28
3. Move the handlebar up or down to adjust the handle-
bar height to the desired position.
CAUTION
:
@
Make sure that the projection on the handlebar is not
installed into the area a shown.
@
4. Tighten the handlebar bolts and install the handlebar
cover.
CAUTION
:
@
Make sure that the small gap b side of the handlebar
holders faces forward c.
@
Handlebar bolt tightening torque:
14.5 Nm (1.45 m·kgf, 11 ft·lb)
U8ET10.book Page 28 Monday, June 14, 2004 5:42 PM
Comments to this Manuals