Yamaha MO6 Owner's Manual download pdf (Page 92)

Quick Guide Creating a Song on the MO

Creating a Song

Owner’s Manual

As shown below, the Jobs are divided into six main groups,

each of which is selected using the [F1] – [F6] buttons.

After specifying the track and range over which the Job is

to be applied, set Quantize to “ ” (8th note) according to

the notation example above. Set the Strength to “100%,”

SwingRate to “050%,” and GateTime to “100%.” Regarding

these parameters, see page 183.

n Set the Quantize value to correspond to the smallest value notes in

the track you are working with. For example, if the data was

recorded with both quarter notes and eighth notes, use eighth note

for the quantize value.

After the Job has been completed, a “Completed”

message appears and operation returns to the original

display.

An “Executing...” message is shown when it takes a short amount of

time to execute the Job. Never attempt to turn off the power while the

Job is being executed. Turning the power off in this state results in loss

of all user data.

If you are satisﬁed with the result of the Job, go to step 7.

If not, execute the UNDO Job in the [F1] UNDO display in

the Song Job mode to restore the data to its previous state,

then try out the Job (from step 4) again. For details about

Undo, see next page.

In addition to Quantize, you’ll ﬁnd a variety of other useful

and powerful Jobs in the Song Job mode (page 183) and

Pattern Job mode (page 199).

Song Location

The Song Play mode has a convenient Location function

that lets you jump to user-speciﬁed parts of a Song. This

lets you assign a speciﬁc measure number in the selected

Song, and instantly jump to the assigned measure—either

during playback or when the Song is stopped. Two

Locations can be assigned.

■ Assigning Locations

Select the desired measure in the recorded Song for the

Location. (Highlight “MEAS” and use the [INC/YES] and

[DEC/NO] buttons or data dial.) Then, to assign the

measure to Location 1, simultaneously hold down the [SET

LOCATE] button and press the [G] (Reverse) button.

To assign Location 2, use the [H] (Forward) button.

■ Jumping to an assigned Location

To instantly jump to the assigned Location 1 or 2,

simultaneously hold down the [SET LOCATE] button and

pressing the [G] (Reverse) button (for Location 1) or the

[H] (Forward) button (for Location 2).

Press the [JOB] button to enter the Song Job

mode.

[F1] UNDO Undo (Canceling the executed Job)/Redo

(Restoring the executed Job) functions

[F2] NOTE Note Data Job

[F3] EVENT Event Job

[F4] MEAS Measure Job

[F5] TRACK Track Job

[F6] SONG Song Job

Press the [F2] NOTE button, move the cursor

to “01: Quantize” then press the [ENTER]

button to call up the Quantize Job display.

Set the relevant Job parameters.

Press the [ENTER] button to execute the Job.

[F1] [F2] [F3] [F4] [F5] [F6]

Indicates the Job List. Because all the Jobs cannot be

displayed simultaneously, you will need to use the cursor

buttons to scroll the display in order to ﬁnd the desired Job.

Track over which

the Job is applied

Range over which

the Job is applied

CAUTION

Press the [SONG] button to return to the Song

Play mode, then press the [F] button to hear

the Song over which the Job is applied.

Save the Song data to a USB storage device in

the File mode (page 98) before turning the

power off.

EDIT

COMPARE SCENE STORE

JOB STORE

SET LOCATE

LOCATE

REC

SEQ TRANSPORT

Specify a measure number

to be registered.

In this example, the selected measure

is assigned to Location 1. The current

settings for Locations 1 and 2 are

shown at the top right of the display.

LOCATE

REC

SEQ TRANSPORT

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 239 240

Comments to this Manuals

No comments

Yamaha MO6 Owner's Manual Page 92

Comments to this Manuals

Related products and manuals for Music drums Yamaha MO6