Yamaha MO6 Owner's Manual download pdf (Page 210)

Voice mode

Performance

mode

Song mode Utility mode File mode Master mode

Pattern mode

Mixing Voice

mode

Reference

Utility Job mode

210

Owner’s Manual

In this Mode, you can restore this synthesizer’s User memory (page 149) to the factory default settings (Factory Set). For details, see page

26.

■ Supplementary

Setting the default display when turning the power on

1 Enter the desired mode and the program number you wish to call up ﬁrst when turning the power on.

2 Press the [ENTER] button while holding the [STORE] button to register the mode and program number set in step 1.

3 Set the PowerOnMode parameter to “last” in the [UTILITY] → [F1] GENERAL → [SF4] OTHER display.

4 Press the [STORE] button to store the Utility setting made in step 3 above.

5 Turn the power off and turn the power on again to call up the mode/program number set in step 2 to the display.

[SF3] SYNC (Synchronization)

From this display you can set various parameters related to MIDI clock and synchronization.

MIDI Sync Determines whether Song/Pattern/Arpeggio playback will be synchronized to the instrument’s internal clock or

an external MIDI clock.

Settings: internal, MIDI, MTC

internal ..............................Synchronization to internal clock. Use this setting when this synthesizer is to be used alone or as the

master clock source for other equipment.

MIDI ..................................Synchronization to a MIDI clock received from an external MIDI instrument via MIDI.

MTC (MIDI Time Code).....Synchronization to an MTC signal received via MIDI. MMC signals are transmitted via MIDI. Use this

setting when this synthesizer is to be used as a MIDI slave, such as when synchronized to an MTC-

capable MTR. The MTC Sync function is available only in the Song mode.

n Please keep in mind that the song or pattern will not start even if you press the [F] (Play) button when the MIDI Sync

is set to other than “internal.”

n MTC (MIDI Time Code) allows simultaneous synchronization of multiple audio devices via standard MIDI cables. It

includes data corresponding to hours, minutes, seconds, and frames. This synthesizer does not transmit MTC. A device

such as the Yamaha AW2400 is necessary in order to use this synthesizer as an MTC master.

n MMC (MIDI Machine Control) allows remote control of multitrack recorders, MIDI sequencers, etc. A MMC-compatible

multitrack recorder, for example, will automatically respond to start, stop, fast forward, and fast reverse operations

performed on the controlling sequencer, thus keeping playback of the sequencer and multitrack recorder aligned.

ClockOut Determines whether MIDI clock (F8) messages will be transmitted via MIDI.

Settings: on (transmitted), off

SeqCtrl (Sequencer Control) Determines whether Sequencer Control signals—start, continue, stop, and song position pointer—will be

received and/or transmitted via MIDI.

Settings: off, in, out, in/out

off .....................Not transmitted/recognized.

in ......................Recognized but not transmitted.

out ....................Transmitted but not recognized.

in/out ...............Transmitted/recognized.

MTC StartOffset Determines the speciﬁc time code point from which sequence playback starts, when MTC is received. This

feature can be used to accurately align playback of this synthesizer with an external MTC-compatible device.

Settings: Hour : Minute : Second : Frame

Hour ................00 – 23

Minute .............00 – 59

Second ............00 – 59

Frame ..............00 – 29

[SF4] OTHER

MIDI IN/OUT Determines which physical output terminal(s) will be used for transmitting/receiving MIDI data: MIDI IN/OUT or

USB.

Settings: MIDI, USB

n Two types of terminals above cannot be used at the same time.

ThruPort (Through Port) Many computer sequencers are capable of transmitting data over several MIDI ports, effectively breaking the

16-channel barrier. When using the USB terminal for MIDI transmission/reception, you can have this

synthesizer respond to MIDI data over one port, while relaying the data for another port number (you can set

here) to a separate tone generator (connected to the MIDI OUT terminal).

In this way, 16 channels of data can be played on this synthesizer and another 16 can be played on the

connected MIDI device.

Settings: 1 – 8

BulkInterval (Bulk Interval) Determines an interval time for transmitting the bulk data, when using the Bulk Dump function on the MO (page

148) or receiving Bulk Request messages from an external device.

Utility Job mode

[UTILITY] ➞ [JOB]

[UTILITY] ➞ [F1] GENERAL ➞ [SF4] OTHER ➞ PowerOnMode

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 239 240

Yamaha MO6 Owner's Manual Page 210

Comments to this Manuals

Yamaha MO6 Owner's Manual Page 210

Comments to this Manuals

Related products and manuals for Music drums Yamaha MO6