Yamaha MO6 Owner's Manual download pdf (Page 114)

Quick Guide Connecting the MO to external devices

Using the MO with computer software

114

Owner’s Manual

If you turn the power off without storing, the currently edited settings

will be lost.

Never attempt to turn off the power while an “Executing...” or “Please

keep power on” message is shown. Turning the power off in this state

may cause the system to freeze and prevent normal startup the next

time the power is turned on, as well as resulting in the loss of all user

data.

Set the Port setting for remote control on the software,

referring to the illustration in step 4.

Speciﬁc instructions for setting up your particular software

follow. For instructions on how to start the software, refer to

the documentation included with the software.

■ Cubase SX 3

1 Pull down the [Devices] menu and select [Device

Setup] to call up the “Device Setup” window.

2 Click the [+] button and add “Mackie Control.”

3 Select “Mackie Control” from the popup list.

4 When setting the Port to “4,” for example, in step 4 of

“Setting up for Remote Control,” set the MIDI Input to

“YAMAHA USB IN 0-4” and the MIDI Output to

“YAMAHA USB OUT 0-4.”

n The functions of buttons on the Mackie Control are assigned to the

buttons of the MO, with the exception of UserA and UserB

(FootSw) which are not supported by the MO.

■ SONAR 4

1 Pull down the [Options] menu and select [MIDI

Devices] to call up the “MIDI Devices” window.

2 When setting the Port to “4” for example in step 4 of

“Setting up for Remote Control” add “YAMAHA USB IN

0-4” to the “Inputs” and add “YAMAHA USB OUT 0-4”

to the “Outputs.”

3 Pull down the [Options] menu and select [Control

Surfaces] to call up the Control Surface window.

4 Click the “[+] button, select “Mackie Control,” then set

the Input Port to “YAMAHA USB IN 0-4” and the Output

Port to “YAMAHA USB OUT 0-4” (for example, when

setting the Port to “4” in step 4 of “Setting up for

Remote Control”).

■ Digital Performer 4.52

1 Pull down the [Setup] menu and select [Control Surface

Setup] to call up the “Control Surface” window.

2 Click the [+] button.

3 Select “Mackie Control” in the Driver section.

4 In the box for setting “Unit” and “MIDI,” select “Mackie

Control” in the “Unit” section and select the MIDI port in

the “MIDI” section.

■ Logic Pro 7

When turning on the power of the MO before starting

Logic:

1 Start Logic on the computer, then turn on the power of

the MO.

2 Start Logic on the computer.

Logic automatically recognizes the MO as Logic

Control and performs the required settings.

When starting Logic before turning on the power of the

MO:

1 Start Logic on the computer, then turn the power to the

MO on.

If you have already set the software to be controlled to

“Logic” in the Utility mode, you need not perform step 2

because Logic automatically recognizes the MO when

this step is performed.

2 Set the software to be controlled to “Logic” in the Utility

mode, then enter the Remote Control mode.

Logic automatically recognizes the MO and performs

the required settings.

Press the [ENTER] button to execute the

settings.

Press the [STORE] button to store the settings

as the system settings of the Utility mode.

Start the software to be remote-controlled,

and make the MIDI settings and remote control

settings.

CAUTION

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 239 240

Comments to this Manuals

No comments

Yamaha MO6 Owner's Manual Page 114

Comments to this Manuals

Related products and manuals for Music drums Yamaha MO6