Yamaha MO6 Owner's Manual download pdf (Page 80)

Quick Guide Creating a Song on the MO

Creating a Pattern

Owner’s Manual

When setting the parameter to on, you can use the

Arpeggio on this track.

Set the Bank to “pre” and Ctgr (category) to “Bass.” Try out

some different bass patterns here.

n In addition using the preset Arpeggios, you can also create your

own original Arpeggio data. See page 97.

When this parameter is set to on, you can record the

Arpeggio playback to the track as MIDI sequence data.

When the “sound” icon below is displayed, Click is on and

the metronome will play during the recording.

Play a note or notes on the keyboard to trigger Arpeggio

playback. The root chord of the bass pattern changes

depending on the key you play.

Next, let’s record the guitar pattern.

Press the [TRACK SELECT] button so that its lamp lights,

and select a Part by pressing the Number [3] button.

Follow steps 8 –14 above, this time selecting the “GtPl”

(Guitar & Plucked) in the Arpeggio category, and try out the

various guitar phrases.

Type, Loop, and Quantize

Type

The “replace” setting lets you overwrite an already

recorded track with new data. The ﬁrst recording is

lost, and the new one takes its place.

The “overdub” setting lets you record (layer)

additional data to a track that already contains data.

These methods are both realtime recording methods.

The “step” setting (Step recording) allows you to

compose your performance by “writing” it down one

event at a time. For details, see page 82.

Loop

This function plays back the Pattern repeatedly in a

“loop.” If Type is set to “overdub” and Loop to “on,”

you can add separate notes or parts in order. For

example, you could record the parts of a drum kit one

by one—recording the kick on the ﬁrst pass, a snare

on the second, a hi hat part on the third, and so on.

This technique is also convenient for adding non-note,

sound-shaping data, such as that of the Knobs and

Controller.

Since we will be recording with the Arpeggio in this

example, set Loop to “off” here.

Quantize

Record quantize aligns the timing of notes in real time,

as you record. This makes sure that all the notes will

be recorded exactly on the beat, even if your playing

is somewhat off the beat.

Since we will be recording with the Arpeggio in this

example, set Quantize to “off” here.

Set the PartSw (Part Switch) parameters to off

in the [F3] ARP display.

Set the Arpeggio Bank, Category, and Type.

TIP

Set the RecArp parameter to on in the [F4]

RECARP (Record Arpeggio) display.

Press the [F5] CLICK button to turn Click on

and play the metronome during the recording.

Press the [

] (Play) button to start recording.

Turn the [ARPEGGIO ON/OFF] indicator off,

and press the [F] (Play) button to hear your

newly recorded bass guitar pattern.

Select the track to which the guitar will be

assigned.

Record the guitar part using the Arpeggio, in

the same way you did with the bass guitar part

above.

LOCATE

REC

SEQ TRANSPORT

Actual recording starts

after one measure.

Start recording Arpeggio playback

Recording stops automatically

when Pattern playback reaches

the end, since Loop is set to “off.”

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 239 240

Comments to this Manuals

No comments

Yamaha MO6 Owner's Manual Page 80

Comments to this Manuals

Related products and manuals for Music drums Yamaha MO6