Yamaha MO6 Owner's Manual download pdf (Page 115)

Quick GuideConnecting the MO to external devices

Using the MO with computer software

115

Owner’s Manual

Using the Remote Control functions

The REMOTE display appears, and the panel controls are enabled for Remote operation of the computer software (their

normal functions are disabled).

n Press this button again to exit from the Remote Control mode.

Change the Mode by simultaneously holding down the [F6] SHIFT button and pressing the [DAW REMOTE] button.

The following explains which sequencer functions are assigned to which panel controls in the remote control.

n For details about how to operate the Editor, refer to the PDF manual included with the Editor.

■ [J], [F], [I], [ IE], [G], [H] buttons

The six MODE buttons are used as transport controls, letting you start/stop playback of the DAW software on the computer.

■ [EDIT], [JOB], and [STORE] buttons

■ [ARPEGGIO ON/OFF] button

To enter the Remote Control mode, press the [DAW REMOTE] button (the lamp flashes).

Select the software to be remote-controlled (Mode A or Mode B).

Use the Knobs and buttons on the MO to remotely control the software.

When the Mode is set to “General”

or “Cubase”

Not used.

When the Mode is set to “Logic” These buttons perform the same functions as those of the [OPTION], [CONTROL] and [ALT] buttons on the Logic

Control.

When the Mode is set to “SONAR” These buttons perform the same functions as those of the [M2], [M3] and [M4] buttons on the Mackie Control.

When the Mode is set to “D.Perf” These buttons perform the same functions as those of the [OPTION], [CONTROL] and [COMMAND] buttons on the

Mackie Control.

When the Mode is set to “General”

or “Cubase”

Not used.

When the Mode is set to “Logic” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.

When the Mode is set to “SONAR” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.

When the Mode is set to “D.Perf” The button can be used to switch the whether the send/effect number of DAW is displayed on the LCD or not.

DAW

REMOTE

FILE UTILITY

DEMO

DAW

REMOTE

Mode A Mode B

PAN SEND

TONE

ARP FX

ASSIGN

MEF

These dark bars serve as the cursor, indicating the

track/part currently being edited by the Knob.

Moving the slider automatically moves the cursor to

the corresponding track/part.

Press the Control function button to

change the functions assigned to the

[F1] – [F6] and [SF1] – [SF5] buttons

(shown at the bottom of the display).

Refer to the separate Data List.

Upper row indicates the setting

values for knobs/sliders 1 – 4 on

the DAW controller.

Bottom row indicates the setting

values for knobs/sliders 5 – 8 on

the DAW controller.

The functions of the buttons on each DAW controller are assigned to

the [F1] – [F6] and [SF1] – [SF5] button on the MO. The functions to

be assigned depend on the software selected in the Mode A or B.

For details, refer to the “Remote Control Assignments” on page 117.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 239 240

Comments to this Manuals

No comments

Yamaha MO6 Owner's Manual Page 115

Comments to this Manuals

Related products and manuals for Music drums Yamaha MO6