Yamaha RX-A3000 Owner's Manual download pdf (Page 118)

SETUP

Controlling the remote control to operate various functions

En 118

Press iENTER to set the number.

“OK” appears in the display window if setting was

successful.

“NG” appears in the display window if the setting was

unsuccessful. In this case, start over from step 3.

Press BSETUP again to exit from the setup

menu.

■

Switching between BD player

linked to scene selections

Press eSCENE and at the same time press

dAV2 and hold it for approximately 3 seconds.

“OK” appears in the display window if setting was

successful.

Then you can operate the external components by

switching the input source to AV2, or selecting AV2 in

the registered scene.

Same steps for operating other external components,

press eSCENE and at the same time press the input

source key selected in step 3 and hold it for

approximately 3 seconds.

Programming from other remote

controls

The remote control of this unit can receive remote

control signals from other remote controls and learn the

remote control operation. If a key on the remote control

does not work after being assigned with an external

component’s function or if the remote control code for

that function is not provided, use this learning feature to

make the function operable with the remote control.

Press BSETUP.

“SETUP” appears in the display window.

Press iCursor B / C repeatedly to select

“LEARN” and press iENTER.

SETUP

/CH

SCENE

ENTER

SOU

ECEIVE

-A

USB

LTI

TUNER

[ A

]

[ B

]

If you continuously want to set up another code for

another control area, repeat steps 4 to 7.

If operation is not possible and the manufacturer of

your component has more than one code, try each of

them until you find the correct one.

NOTES

• “ERROR” appears in the display window on the

remote control if you press a button not indicated in

the respective step, or when you press more than one

button simultaneously.

• The supplied remote control does not contain all

possible codes for commercially available audio and

video components (including Yamaha components). If

operation is not possible with any of the remote

control codes, program the new remote control

function using the learning feature

(☞p. 118) or use

the remote control supplied with the component.

• Functions programmed using the learning mode take

priority over remote control code functions.

OK

• Perform each of the following steps within 30 seconds.

Settings will be automatically stopped if more than

30 seconds passes since the last operation. To reset,

repeat from step 1.

• If the remote control of the external component uses

infrared rays, this remote control can learn most of its

functions. The remote control may not recognize

special or consecutive signals.

• The keys may not operate the assigned functions

depending on operating conditions of this unit.

Continues to the

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 163 164

Comments to this Manuals

No comments

Yamaha RX-A3000 Owner's Manual Page 118

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A3000