CONNECTIONS
Connecting speakers
En 20
Connecting speakers and subwoofers
Connect your speakers to their respective terminals on the rear panel.
■ Front/Center/Surround/Surround back speaker and
Subwoofer connection
When connecting only one surround back speaker, connect the
speaker to the SURROUND BACK L (SINGLE) jacks.
■ Front/rear presence speaker connection
When using the front presence speakers, connect the front presence
speakers to EXTRA SP1 jacks. When using the rear presence
speakers, connect the rear presence speakers to EXTRA SP2 jacks.
The presence speakers supplement the sound from the front and
surround back speakers with extra ambient effects produced by the
sound field programs (☞
p. 57). You can adjust the vertical position
of dialogues with using the front presence speakers (☞
p. 61).
Front presence speakers
Rear presence speakers
CAUTION
• Remove the power cable of this unit from the power outlet before connecting the speakers.
• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”
(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.
• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP
WIRES!” will appear on the front panel display when this unit is switched on.
SURROUND SURROUND BACK/
CENTER
SINGLE
FRONT
BI-AMP
(FRONT)
1
EXTRA
P1
NE2
Z
F.PRESE
V 2 AV
V
AV
AV
V 7
3
RR
ND
R. BA
K
BW
FE
ENTER
LTI
H INP
MP
NENT VIDE
M
NIT
R
T
Z
NE
ONE OU
RE OUT
NE
Z
NE 3
R. PRESENC
R
NT
F. PRESENCE
RR
ND
R. BA
K
ENTE
REAR
2
RS-232
T
REM
T
TRI
ER
12
0.1
.
DVD
Subwoofer
Center speaker
Front speaker
Surround
speaker
Surround back
speaker
RL
RL RL
EXTRA SP1
ZONE2/ZONE3/
F.PRESENCE
AV 7
OUT
ZONE2/ZONE3/
R.PRESENCE
EXTRA SP2
R.
Front presence speaker
RL
Rear presence speaker
RL
• Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
• Place the rear presence left and right speakers so that the distance
between the rear presence left and right speakers is same as the
distance between front presence left and right speakers.
0.5 – 1 m 0.5 – 1 m
FPL FPR
LR
1.8 m 1.8 m
RPR RPL
SL
1.8 m
SR SBLSBR
1.8 m
Comments to this Manuals