Yamaha RX-A3000 Owner's Manual download pdf (Page 102)

SETUP

Setting various functions (Setup menu)

En 102

■

Adjusting DSP effect and volume level

Adaptive DSP Level

Automatically adjust the level of DSP effect in conjunction with

the volume level.

Setting this unit’s video output function

Video setup items

■

Analog-to-analog video conversion

Analog to Analog Conversion

Enables or disables video conversion between analog video jacks.

■

Adjusting video with conversion of video

signal to HDMI

Processing

Adjust video with conversion of video input to HDMI video.

Resolution

Off Disables automatic adjustment of the level of DSP

effect.

On (Default) Adjusts the degree of DSP effect in conjunction with

volume level. The higher the volume level, the less the

DSP effect applied. The lower the volume level, the

greater the DSP effect applied.

This feature also corrects sound effect according to

the result of automatic measurement.

Analog to Analog

Conversion

Enable or disable video conversion between analog

video jacks.

Processing Enable or disable adjustment of resolution, aspect

ratio and video signal correction for video signal

converted to HDMI video.

Off Disables video conversion between analog video

jacks.

On (Default) Enables video conversion between analog video jacks.

• Analog-to-HDMI video conversion is always possible unless

video signals are being input at the HDMI input jacks or 1080p-

resolution analog video signals are being input (☞

p. 146).

• This unit does not convert 480 line video signals and 576 line

video signals interchangeably.

• 480p-, 576p-, 1080i- and 720p-resolution video signals can not

be output at the S-video and video jacks of MON.OUT/ZONE

OUT (☞

p. 146).

• The converted video signals are only output at the MONITOR

OUT jacks.

• When composite video or S-video signals from a VCR are

converted into component video signals, the picture quality may

suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video

jacks cannot be converted or may be output abnormally. In such

cases, set “Analog to Analog Conversion” to “Off.”

Off (Default) Video are not adjusted with processing.

On Video are adjusted with processing.

Auto (Default) Automatic upscaling in accordance with TV

resolution.

480p (576p) Upscaling to 480p (576p).

720p Upscaling to 720p.

1080i Upscaling to 1080i.

1080p Upscaling to 1080p.

Through No upscaling.

• When a TV is connected to this unit via the HDMI jack, this unit

automatically detects a resolution that the TV supports. Only the

detected resolution can be selected.

• If this unit cannot detect the resolution that the TV supports, set

“MONITOR CHECK” in the Advanced Setup menu to “SKIP”

(☞

p. 127) and try again.

1 : This item can be set when set “Processing” to “On.”

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 163 164

Comments to this Manuals

No comments

Yamaha RX-A3000 Owner's Manual Page 102

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A3000