Yamaha RX-A3000 Owner's Manual download pdf (Page 49)

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 49

When “E-7” or “E-8” is displayed:

Press iENTER.

Check that the environment is suitable for

accurate measurement.

Press iCursor E to select “RETRY.”

Press iENTER to use YPAO again.

When “E-5” or “E-9” is displayed:

Press iENTER.

Check that the environment is suitable for

accurate measurement.

Press iCursor D / E to select a option.

PROCEED:

When “E-5” is displayed, measurement can proceed.

However, the measurement in noisy environment may

reduce the accuracy.

When “E-9” is displayed, resume the aborted step.

RETRY:

Restart measurement from the beginning.

Press iENTER to execute the selected

option.

When “E-10” is displayed:

Press iENTER.

Press iCursor E to select “EXIT.”

Press iENTER to terminate YPAO, and

switch the unit to standby mode.

Turn on the unit and use YPAO again.

■

When a warning message is

displayed after measurement

See “Warning messages” (☞p. 50) for instructions on

resolving the problem. The speaker causing the problem

can be confirmed from the TV screen display.

To exit YPAO with some options

Use iCursor B / C to select “Save/Exit”

and press iENTER.

Use iCursor D / E to select one of the

following options and press iENTER.

SAVE:

Exits YPAO applying the results of measurement.

CANCEL:

Returns to the previous screen (warning message

screen).

EXIT:

Exits YPAO without saving the results.

ENTER

SOU

ECEIVE

-A

LTI

TUNER

[

]

[

]

NOTE

Although the results of acoustics measurement can be

applied when a warning message is displayed, optimal

sound will not be achieved. Resolving the problem

and using YPAO to measure acoustics again is

recommended.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 163 164

Comments to this Manuals

No comments

Yamaha RX-A3000 Owner's Manual Page 49

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A3000