Yamaha RX-A3000 Owner's Manual download pdf (Page 110)

SETUP

Setting various functions (Setup menu)

En 110

■

Entering standby mode

automatically when no operations

are performed

Auto Power Down

If you do not operate this unit or use the remote control

for an extended period of time, it will automatically go

into standby mode (Auto Power Down function). This

function’s default setting is “Off.” When you want to

enable this function, set the amount of time to pass

before this unit will enter standby.

■

Assigning component input and

output jacks

Input Assignment

Assigns the coaxial or optical input jack(s) to the

selected input source when this unit’s initial settings do

not correspond to your needs. Change the parameter to

reassign the respective jacks and effectively connect

more components.

Once the input jacks are reassigned, the corresponding

component can be selected using the Input selector

buttons.

Example: Assigning the OPTICAL input jack to

“AV1.”

Press iENTER to display the “Input

Assignment” screen.

Press iCursor B / C / D / E to select the

cell at the intersection with the “AV1” and

“Coax/Opt” and then press iENTER.

Press iCursor D / E to select “c” and then

press iENTER.

Select “None” to clear the existing assignment.

Press iRETURN to apply change and

return to the previous screen.

RETURN

ENTER

SOU

ECEIVE

-A

LTI

TUNER

[

]

[

]

4Hours Goes into standby mode, when you have

not operated this unit for four hours.

8Hours Goes into standby mode, when you have

not operated this unit for eight hours.

12Hours Goes into standby mode, when you have

not operated this unit for twelve hours.

Off (Default) Auto Power Down function is disabled.

This unit starts a countdown of 30 seconds before

entering the standby mode. Pressing any key of the

remote control during the countdown cancels entering

the standby mode and reset the timer.

The choices indicate the following jacks.

a, b, f : COAXIAL jacks

c, d, e : OPTICAL jacks

, , , : COMPONENT VIDEO jacks

The choices indicate the jacks marked the same

alphanumeric on the rear of this unit. For details on

marks on the rear of this unit, refer to “Rear panel”

(☞

p. 10).

• A specific item cannot be selected more than once for

the same type of jack.

• Only component, coaxial and optical jacks can be

reassigned.

• Coaxial and optical jacks cannot be assigned to the

input at the same time.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 163 164

Comments to this Manuals

No comments

Yamaha RX-A3000 Owner's Manual Page 110

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A3000