Yamaha RX-A3000 Owner's Manual download pdf (Page 101)

SETUP

Setting various functions (Setup menu)

En 101

■

Synchronizing audio/video output

Lipsync

Adjusts the delay between audio and video output (Lipsync

function).

Selects a compensation method for the delay between audio and

video output.

■

Auto-adjusting Dolby Digital and DTS

dynamic range

Dynamic Range

Selects the dynamic range adjustment method for audio bitstream

(Dolby Digital and DTS) signal playback.

■

Setting the maximum volume

Max Volume

Specify the maximum volume level so that sound is not too loud.

The default setting of +16.5 dB produces the highest volume.

■

Setting the startup volume

Initial Volume

Sets the initial volume for when this receiver is turned on. When

this parameter is set to “Off,” the volume is set at the level when the

receiver last entered standby mode. J2

■

Video signal output in Pure Direct Mode

Pure Direct Mode

Selects whether or not this unit outputs video signal in Pure Direct

Mode.

Auto (Default) J1 When connecting to a TV via HDMI, automatically

adjusts output timing if the TV supports an automatic

lipsync function.

Manual Manually adjusts the correction time. Select this when

the monitor does not support the automatic lipsync

function.

Adjustable range 0 ms to 250 ms

Default setting 0 ms

Adjustment

increments

1 ms

MAX (Default) Produces audio without adjusting the dynamic range.

STD Adjusts the dynamic range for optimum volume for

regular home use.

MIN/AUTO (MIN) Sets the dynamic range suitable for low

volume or a quiet environment, such as at night, for

bitstream signals except for Dolby TrueHD signals.

(AUTO) Adjusts the dynamic range for Dolby

TrueHD signals based on input signal information.

Adjustable range -30.0 dB to +16.5 dB (maximum volume)

Default setting +16.5 dB

Adjustment

increments

5.0 dB

Adjustable range Off, Mute, -80.0 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

Auto (Default) Automatically output video signal when the input

source equipping video signal input jacks or content

window is selected. If no video signal is input, only

the wall paper is displayed.

Video Off Does not output video signal including the wall paper.

1 : The setting is effective at the HDMI OUT jack selected by using xHDMI

OUT.

2 : When you set “Max Volume” at a lower level than “Initial Volume,” “Max

Volume” has priority.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 163 164

Comments to this Manuals

No comments

Yamaha RX-A3000 Owner's Manual Page 101

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A3000