Yamaha SREV1 Owner's Manual download pdf (Page 93)

Error Messages 87

SREV1—Owner’s Manual

Appendix

Error Messages

Message Reason Solution

VERSION MISMATCH.

PUSH ANY KEY TO

DOWNLOAD.

The software versions of the SREV1 and

RC-SREV1 do not match.

Press any button to download the necessary

software from the SREV1 to the RC-SREV1 in

order to match the software versions.

COMMUNICATION

TIMEOUT.

Communication with the SREV1 failed.

Turn off both the SREV1 and RC-SREV1 and

check the remote cable connections, also

check for breaks in the cable.

WRITE PROTECTED.

A write protected Quick memory, pro-

gram, or project was selected.

Turn off the protection in order to store or

edit the title. The CD-ROM is always write

protected.

INSERT MEDIA. No media inserted.

Insert the necessary media. Note that it

takes the SREV1 between 20 and 30 sec-

onds to recognize CD-ROMs.

TITLE IS EMPTY! No title has been entered or only spaces. Enter some characters for the title.

!!! LOW BATTERY !!!

The SREV1’s internal backup battery is

getting low.

Ask your Yamaha dealer to change the bat-

tery as soon as possible.

!!! NO BATTERY !!!

RESTORED FROM

BACKUP.

The SREV1’s internal backup battery is

ﬂat and the contents of the bat-

tery-backed memory were lost. The con-

tents were restored from the backup ﬁle

on the Internal card.

Ask your Yamaha dealer to change the bat-

tery as soon as possible.

DATA FILE NOT

FOUND! INSERT

PCMCIA CARD.

When the SREV1 was restarted, the

Reverb mode changed, or a project

loaded, the programs were loaded from

the PC Card but the necessary

impulse-response data could not be

found.

Insert the PC Card containing the necessary

impulse-response data.

DATA FILE NOT

FOUND! INSERT

CD-ROM DISC.

When the SREV1 was restarted, the

Reverb mode changed, or a project

loaded, the programs were loaded from

the CD-ROM but the necessary

impulse-response data could not be

found.

Insert the CD-ROM containing the neces-

sary impulse-response data.

EMPTY DATA! SOME

DATA ISN’T LOADED.

CAN’T SAVE THIS

PROGRAM.

The impulse-response data for the pro-

gram was not loaded.

Load the necessary impulse-response data,

or load the program again.

NO SUFFICIENT

SPACE! CAN’T SAVE

THIS PROGRAM.

The program cannot be stored due to

lack of space on the PC Card or Internal

card.

Insert another PC Card, or delete some

unnecessary programs in order to free some

space.

DESTINATION WRITE

PROTECTED!

You tried to edit the title of a program or

project on the Library page, but the des-

tination ﬁle is write protected.

Use another title, or turn off the write pro-

tection.

COULD NOT

COMMUNICATE

WITH SREV1. CHECK

THE CABLE

CONNECTION AND

SREV1’S POWER,

THEN TURN ON

RC-SREV1 AGAIN.

Communication between the SREV1 and

RC-SREV1 failed during startup.

If the RC-SREV1 is powered by an optional

AC adapter, make sure that the SREV1 is

turned on.

Turn off both the SREV1 and RC-SREV1 and

check the remote cable connections, also

check for breaks in the cable.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 105 106

Comments to this Manuals

No comments