Yamaha SREV1 Owner's Manual Page 82
- Page / 106
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Selecting the Wordclock Source 75
SREV1—Owner’s Manual
Selecting the Wordclock Source
1 Use the [UTILITY] button to locate the DIO page shown below.
2 Use the cursor buttons to select a source.
The button for the currently selected source appears highlighted.
The following wordclock sources can be selected.
This button indicates that a wordclock signal is present and that it’s at the
same frequency as the currently selected source. This source can be selected.
This button indicates that although a wordclock signal is present, it’s not at
the same frequency as the currently selected source. This source can be
selected.
This button indicates that no wordclock signal is present.
This source cannot
be selected.
The button of the selected source appears highlighted, as shown here.
Note: When the wordclock source is changed on the wordclock master device, noise may
occur from the SREV1’s outputs, especially if an MY8-AT I/O card is installed, so turn
down your power amps beforehand, otherwise any connected speakers may be damaged.
Condition Source Description
Always available INT 48K
Internal 48 kHz wordclock (default setting)
When lockable
external wordclock
present
WCLK IN
External wordclock via the BNC WORD CLOCK IN
AES/EBU1
External wordclock via the AES/EBU IN 1
AES/EBU2
External wordclock via the AES/EBU IN 2
AES/EBU I/O card
installed (MY8-AE)
& lockable
wordclock present
SLOT x 1/2
External wordclock via slot x, input pair 1/2
SLOT x 3/4
External wordclock via slot x, input pair 3/4
SLOT x 5/6
External wordclock via slot x, input pair 5/6
SLOT x 7/8
External wordclock via slot x, input pair 7/8
ADAT or Tascam I/O
card installed
(MY8-AT, MY8-TD)
& lockable
wordclock present
SLOT x
External wordclock via slot x
- Owner’s Manual 1
- IMPORTANT 2
- Important Information 3
- NEDERLAND THE NETHERLANDS 8
- Contents 10
- Firing time-stretched pulses 12
- The SREV1 in a Nutshell 13
- SREV1 Features 14
- SREV1 Basics 16
- CD-ROMPC CardInternal Card 18
- Quick memories 18
- SREV1 Basics 9 19
- SREV1 Block Diagram 20
- SREV1 Front Panel 22
- H CD-ROM drive 23
- I Disc activity indicator 23
- J CD-ROM eject button 23
- K Emergency disc eject hole 23
- SREV1 Rear Panel 24
- G MIDI IN & OUT ports 25
- H SERIAL 1 & 2 ports 25
- I REMOTE port 25
- J WORD CLOCK IN connector 25
- RC-SREV1 Control Surface 26
- RC-SREV1 Control Surface 17 27
- RC-SREV1 Display 28
- RC-SREV1 Display 19 29
- BRIGHT CONT 30
- REMOTEDC 12V INPOWER 30
- Getting Started 31
- First Steps 32
- Hookup Examples 33
- Chapter 3—Getting Started 34
- Hookup Examples 25 35
- Connecting the Power Cord 36
- Using CD-ROMs 38
- Using PC Cards 39
- Basic Operation 40
- SREV1 Startup 41
- RC-SREV1 Startup 41
- Selecting Reverb Modes 43
- Assigning Inputs 44
- Chapter 4—Basic Operation 45
- Metering 46
- Setting the Meter Mode 48
- Using Peak Hold 48
- Bypassing the SREV1 49
- Setting the Bypass Mode 49
- Working with Quick Memories 51
- Working with the Library 54
- Working with Projects 57
- Editing Programs 60
- Main 1 Parameters 61
- Main 1 Parameters 53 62
- Main 2 Parameters 63
- Reverb Balance 64
- Fine Reverb Parameters 65
- Pre EQ 57 66
- Chapter 5—Editing Programs 67
- Post EQ 59 68
- 60 Chapter 5—Editing Programs 69
- Loading Impulse-Response Data 70
- Multiple SREV1s 72
- About Multiple SREV1s 73
- Connections 73
- Multiple-unit Operating Notes 74
- MIDI & the SREV1 76
- MIDI Ports 76
- MIDI Pages 77
- DIGITAL MIXING CONSOLE 78
- PARAMETER 78
- Wordclocks 80
- Wordclocks & the SREV1 81
- Wordclock Connections 81
- Chapter 8—Wordclocks 83
- DIGITAL RECORDING CONSOLE 85
- Wordclock Hookup Examples 79 86
- SREV1 #1 86
- SREV1 #2 86
- SREV1 #3 86
- SREV1 #4 86
- I/O Options 87
- I/O Options & the SREV1 88
- Available I/O Cards 88
- Choosing I/O Cards 89
- Installing I/O Cards 90
- Troubleshooting 91
- 86 Troubleshooting 92
- Appendix 93
- Confirmation Messages 94
- General Messages 95
- General Specifications 96
- Remote Cable Wiring Diagram 97
- Digital Input Specifications 97
- Digital Output Specifications 97
- Control I/O Specifications 97
- Dimensions 98
- Glossary 100
- SREV1—Owner’s Manual 101
- MIDI Implementation Chart 105
- YAMAHA CORPORATION 106
© 2020, manymanuals.com. All rights reserved. | 0.172 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals