Yamaha SREV1 Owner's Manual download pdf (Page 46)

Metering 37

SREV1—Owner’s Manual

Metering

Input and output signal levels can be metered in several places: the 14-segment meters

on the RC-SREV1 display pages, the 11-segment meters on the Meter I/O page, the

SIGNAL and CLIP indicators on the SREV1, and the CLIP indicators on the

RC-SREV1. The Peak Hold function works with all of these meters. See “Using Peak

Hold” on page 39 for more information.

14-segment Meters

Input and output signal levels can be metered by using the 14-segment meters that

appear on most RC-SREV1 display pages. In 2-channel mode, input and output signal

levels can be metered simultaneously. In 4-channel or 2-channel x2 mode, however,

either the input or output levels can be metered, not both simultaneously. See “Setting

the Meter Mode” on page 39 for more information.

The 14-segment LCD meters have the following resolution: CLIP / –3dB / –6dB / –9dB

/ –12dB / –15dB / –18dB / –24dB / –30dB / –36dB / –42dB / –48dB / –54dB / –60dB.

The following table shows how the input and output meters appear in each mode.

Mode 2-channel 4-channel 2-channel x2

Meter

I/O

INPUT &

OUTPUT

INPUT

OUTPUT

INPUT

OUTPUT

Use the METER MODE option on the Meter I/O page to switch

between OUTPUT and INPUT (see page 39).

Channels

Left, right

Front-left, front-right,

rear-left, rear-right

A-left, A-right, B-left, B-right

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 105 106

No comments

Yamaha SREV1 Owner's Manual Page 46