Yamaha TZ125M1 Service Manual Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 257
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
FRONT FORK SPRING PRELOAD ADJUSTMENT
3-25
CC
CAUTION:
Tighten the pinch bolts to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
NOTE:
Adjust the installation angle of the steering
damper stay so that the dimension d is
between 3 mm (0.12 in) and 5 mm (0.20 in)
when the handlebar is turned fully to the
left.
Tighten the pinch bolt (steering damper
stay) toward the front of the chassis.
4. Check:
Steering smooth action
Turn the handlebar to make sure no parts
are being contacted with others.
Contact Repair.
5. Install:
Front fender
Front wheel
Cowling
EC36F012
FRONT FORK SPRING PRELOAD ADJUST-
MENT
1. Adjust:
Spring preload
By turning the adjuster 1.
Stiffer
aa
Increase the spring preload.
(Turn the adjuster
11
in.)
Softer
bb
Decrease the spring preload.
(Turn the adjuster
11
out.)
INSP
ADJ
Extent of adjustment:
Maximum Minimum
Fully turned-in Fully turned-out
position position
]
Page view 74
1 ... 74 75 76 ... 257

Comments to this Manuals

No comments