Yamaha YZF-R1 Service Manual download pdf (Page 127)

3 - 32

CHK

ADJ

ADJUSTING THE EXUP CABLES/

CHECKING THE COOLANT LEVEL

7. Install:

• bottom cowling

Refer to “COWLINGS”.

EAS00102

CHECKING THE COOLANT LEVEL

1. Stand the motorcycle on a level surface.

NOTE:

_

• Place the motorcycle on a suitable stand.

• Make sure the motorcycle is upright.

2. Check:

• coolant level

The coolant level should be between the

maximum level mark a and minimum level

mark b.

Below the minimum level mark → Add the

recommended coolant to the proper level.

CAUTION:

_

• Adding water instead of coolant lowers

the antifreeze content of the coolant. If

water is used instead of coolant check,

and if necessary, correct the antifreeze

concentration of the coolant.

• Use only distilled water. However, if dis-

tilled water is not available, soft water

may be used.

3. Start the engine, warm it up for several min-

utes, and then turn it off.

4. Check:

• coolant level

NOTE:

_

Before checking the coolant level, wait a few

minutes until it settles.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 438 439

Comments to this Manuals

No comments