Yamaha NX-S100S Owner's Manual download pdf (Page 75)

_gIolll_le:_gleIeHh_:

• Tuner

Problem Cause Remedy

FM/ Previously preset The preset stations are cleared. Pre-se_ the stmions once again.

AM stations cannot be

tuned in.

FM stereo reception is

noisy.

There is distortion, and

clear reception cannot

be obtained even with a

good FM antenna.

The desired station

cannot be tuned in with

the automatic tuning

method.

The desired station

cannot be tuned in with

the automatic tuning

method.

The characteristics of FM stereo

broadcasts may cause this problem

when the transmiaer is _o far away or

the antenna input is poor.

Check the antenna connections.

Try using a high-quality directional FM

antenna.

Use the manual tuning method.

Adjust the antenna lx_sition to eliminate

multip_th interthrence.

There is multipath interfhrence.

The station is too weak. Use a high-quality directional FM antenna. 16

Use the manual tuning method. 54

The signal is weak or the antenna

connections are ]oose.

Tighten the AM loop antenna connections 16

and orient it fbr best reception.

Use the manual tuning method. 54

Refer

to page

There are continuous Noises result from lightning, Use an ouldoor antenna and a ground wire.

AM crackling and hissing fluorescent lainps, motors, thermostats This will help somewhat, but it is difficult _o

noises= and other electrical equipment, eliminate al! noise.

There are buzzing and A TV set is being used nearby. Move this unit away from the TV.

whining noises

(especially in the

evening).

• Remote control

Problem Cause Remedy Refer

to page

The remote control Wrong distance or angle. The remote control will function within a 7

does not work nor maximum range of 6 in (20 feet) and no inore

function properly, than 30 degrees oft_axis from the front panel.

Direct sunlight or lighting (from an Reposition this unit.

inveller type of fluorescent lamp, etc.) is

striking lhe remote control sensor of INs

unit.

The batteries are weak. 3

The manufacture code is not correctly 57

set. 57

Even if the manutiicturer code is

COITeCflyset, there are some models that

do not respond _o the remoie con_roh

Replace all batteries with new ones.

Set the code COITeCfly.

Try setting another code of lhe same

manuthcturer.

Operate the component using its remote

control.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82

Comments to this Manuals

No comments

Yamaha NX-S100S Owner's Manual Page 75

Comments to this Manuals

Related products and manuals for Receiver Yamaha NX-S100S