Yamaha NX-S100S Owner's Manual download pdf (Page 31)

• SILENT CINEMA DSP

You can enjoy a powerful sound field similar Io what you

could expert from actual speaker,s with SILENT

CINEMA DSR You can lislen to SILENT CINEMA DSP

by connecting your headphones to the _ SILENT jack

while the digital sound field processor is on. Enjoy all the

DSP program using the headphones. The "SILENT"

indicator lights up on the front panel display. (When

sound effects m'e off, you listen to the soume with normal

slereo reproduction.)

--'4":

• When SILENT CINEMA DSP is functioning, the "SILENT'

indicator lights up on the front panel display.

• This l_ature is not available when 96-kHz sampling digital

signals are input to this unit.

• The sound of LFE channel will be mixed and output from the

headphone.

• Normal Stereo Reproduction

Press STEREO Io 1urn off the sound effect for normal

s_ereo reproduction.

Press STEREO again to turn the sound effect back on.

• If you turn off the sound ett_cts, no sound is output from the

cen_er or rear speakers.

• The volume may be greatly reduced when you turn off the

sound ett?cts or if you set "4 D. RANGE" on the SET MENU

to MIN. In this case turn on the sound eft_ct.

• The sound of LFE channel will be directed to the front letl and

right or the subwool_r (or both) channels depending on the

setting of "I D BASS" on the SET MENU.

• If you turn off the sound et_cts while a Dolby Digital or DTS

signal is being output, the dynamic range of the signal is

automatically compressed and the sounds of the center and rear

speaker channels are mixed and output from the fi'ont speakers.

• Displaying the information about

input signal

During stereo reproduction, you can display inlk_rm_tion such as

the type, l_._rmat and sampling fbequency of the signal input t_om

the components connected to this unit.

(While playing a stereo source)

U Press AMP.

Press v to display the information about the

input signal.

• Format:

The type of an input signal. When digital input is not known,

the mode is set to the analog mode.

Input signal

Analog signal

PCM signal

Dolby Digital signal

DTS signal

Other digital signals

Display

Analog

PCM

Dolby Digital

DTS

Unknwn Digital

(Unknown Digital)

• f,:

The sampling IYequency of an input signal when a digital signal

is input. If the frequency is not known, "unknown" appears on

the front panel display.

• Audio Channels:

The number of audio channels included in an input signal when

a Dolby Digital or DTS signal is input.

• Rate (bit rate):

The mnount of data contained in an input signal per second

when a Dolby Digital or DTS signal is input. If the bit rate is

not known, "unknown" appears on the fi'ont panel display.

• Fig (flag):

An identit_cation signal contained in an input signal when a

Dolby Digital or DTS signal is input. If the flag is not detected,

"None" appears on the frtmt panel display.

• Notes on 96-kHz sampling digital

signals

The digital input jacks of this unit can handle 96-kHz

sampling digital signals. Note the following when 96-kHz

sampling digital signal is input to this unit:

- DSP programs cannot be selected.

- Sound will be oulput as 2-channel slereo from only the

front left and right speakers. (There ]nay be sound

oulput from the subwoofer depending on the

SPEAKER MODE settings on the SET MENU.)

Therefore, the level of the effect speakers cannot be

adjusted while listening to such a source.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 81 82

Comments to this Manuals

No comments

Yamaha NX-S100S Owner's Manual Page 31

Comments to this Manuals

Related products and manuals for Receiver Yamaha NX-S100S