Yamaha N3X Owner's Manual download pdf (Page 46)

46 • N3X Owner’s Manual

Message List

* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.

* Press any button to exit from these message displays.

Message Descriptions

CLr

Displayed when the initialization (page 40) is completed.

con

Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When

this message appears, you cannot operate the instrument.

E01

Displayed when the character code (page 33) is not appropriate for the file name of the Song which

you are selecting. Switch the character code.

Displayed when the data format is not compatible with this instrument, or the data has some other

problems. This Song cannot be selected.

Displayed when no USB flash drive can be found, or a problem has occurred in the USB flash drive.

Disconnect and connect the device again, then execute the operation. If this message appears

repeatedly even when there aren't any other likely problems, the USB flash drive may be damaged.

E02

Indicates that the USB flash drive is protected.

E03

Displayed when the memory of the USB flash drive becomes full, or the number of files and folders

exceeds the system limit.

E04

Displayed when Audio Song playback or recording has failed. If you are using a USB flash drive to

which data has already been stored or deleted a number of times, first make sure that the device

does not contain important data, then format it (page 37) and connect to the instrument again.

EE1

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-

tributor.

EEE

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-

tributor.

End

Displayed when the current operation is completed.

EnP

The memory of the instrument or the USB flash drive is running out. We recommend that you remove

any unnecessary files (page 39) to ensure sufficient memory capacity before start recording.

FUL

The operation could not be completed because the instrument’s internal memory or the USB flash

drive is nearly full. If this message is shown while recording, your performance data may not be cor-

rectly saved.

n Y

Confirms whether each operation is executed or not.

Pro

Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file

after cancelling the read-only setting.

UnF

Displayed when an unformatted USB flash drive is connected. First make sure that the device does

not contain important data, then format it (page 37).

Uoc

Communication with the USB flash drive has been shut down because of overcurrent to the USB

flash drive. Disconnect the USB flash drive from the [USB TO DEVICE] terminal, then turn on the

power of the instrument again.

UU1

Communication with the USB flash drive has failed. Remove the USB flash drive and make the con-

nection again. If the message appears even when the USB flash drive is connected properly, the USB

flash drive may be damaged.

UU2

This USB flash drive is not supported on this instrument, or too many USB flash drives may have

been connected. Refer to “About USB Flash Drives” (page 36) for information on the USB flash drive

connection.

Appendix

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Comments to this Manuals

No comments

Yamaha N3X Owner's Manual Page 46

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha N3X