Yamaha N3X Owner's Manual download pdf (Page 14)

Playing the Keyboard

14 • N3X Owner’s Manual

To close the lid

1 Hold the lid stay and carefully raise the lid.

2 Hold the lid in its raised position and lower the lid

stay.

3 Carefully lower the lid.

When using the music rest, lower the music rest (page 13)

before going on to the next step.

4 Gently close the front portion of the lid.

1 Make sure the power switch on the instrument is

set to the off position.

2 Connecting the power cord

2-1 Set the voltage selector and insert the power cord plug to

the [AC IN] connector. Refer to the “Panel Controls and

Terminals” on page 10 for information on the location of

the [AC IN] connector.

WARNING

Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage rat-

ing appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can seri-

ously damage the internal circuitry and may even pose a shock hazard!

2-2 Insert the plug on the other end of the power cord to a standard AC outlet.

Power Supply

Voltage Selector

Before connecting the AC power cord, check the setting of the voltage selector which is provided in some

areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver to rotate

the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The volt-

age selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, con-

nect the AC power cord to the AC IN and an AC wall outlet. A plug adaptor may be also provided in some

areas to match the pin configuration of the AC wall outlets in your area.

Do not hold here.

Hold here.

Lid stay

Power switch: off

Voltage

Selector

[AC IN] connector

(The shape of the plug differs depending

on the locale.)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Yamaha N3X Owner's Manual Page 14