Yamaha N3X Owner's Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Recording Your Performance
N3X Owner’s Manual •35
4 Select a Voice (page 20) and other parameters such as Beat
(page 22) for recording.
5 Press [RECORD] to engage the Record mode.
The [RECORD] lamp lights up, and the [PLAY/STOP] lamp flashes according to
the current tempo.
To exit from the Record mode, press [RECORD] again.
6 Start recording.
Play a note on the keyboard or press [PLAY/STOP] to start recording.
With MIDI Recording:
While recording, the current measure number is shown on the display.
With Audio Recording:
While recording, the elapsed time is shown on the display.
7 Press [RECORD] or [PLAY/STOP] to stop recording.
Dashes appear on the display in succession, indicating that the recorded data is
being saved. After the data is saved, an “
End
” message appears for three sec-
onds, indicating that the Record mode is disengaged.
NOTICE
While dashes appear in the display in succession, never turn off the power or disconnect
the USB flash drive. Doing so may delete all Song data in the instrument, including exter-
nal Songs (page 31).
8 Press [PLAY/STOP] to hear the recorded Song.
To stop playback, press [PLAY/STOP] again.
Using the Metronome
You can use the metronome while record-
ing, although the metronome sound will not
be recorded.
If memory space is running low:
An “
EnP
” or “
FUL
” message will
appear in the display after pressing
[RECORD]. If “
Enp
” appears, you can
start recording, but the memory may
become full during recording. If “
FUL
appears, you cannot start recording. We
recommend that you first remove any
unnecessary files (page 39) to ensure suffi-
cient memory capacity.
FlashesLights up
NOTE
If the memory becomes full, or the record-
ing data or time exceed the maximum limit
for one song during recording, “
FUL
appears on the display and recording will
stop automatically. In this situation, press
any button to clear the “
FUL
” indication.
Keep in mind that your performance data
may not have been correctly saved.
1. 2.
Measure number
NOTE
With audio recording, the sound input from
the [AUX IN] jack is also recorded.
0.01. 0.02.
Indicates minutes. In
case of 10 minutes
or more, only the
lowest digit is
shown.
Indicates seconds.
Elapsed time
NOTE
The recorded User Song data on this
instrument can be saved to a USB flash
drive. Refer to page 38.
Deleting a Song file
If you want to delete the recorded Song, refer to page 39.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Comments to this Manuals

No comments