Yamaha N3X Owner's Manual download pdf (Page 41)

N3X Owner’s Manual •41

Connections

CAUTION

Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the

power on or off to all components, set all volume levels to minimum (0). Otherwise, damage to the components, electrical

shock, or even permanent hearing loss may occur.

Refer to the “Panel Controls and Terminals” on page 10 for information on the location of the connectors.

Playing a Portable Audio Player with the Built-in Speakers—[AUX IN] jack

You can connect the headphone jack of a portable audio player to the instrument’s [AUX IN] jack, letting you hear

the sound of that audio player through the built-in speakers of the instrument.

NOTICE

To avoid damage to the devices, first turn on the power to the external device, then to the

instrument. When turning off the power, first turn off the power to the instrument, then to the

external device.

 Minimizing noise of the input sound via Noise Gate

By default, this instrument cuts unwanted noise from the input sound. However, this

may result in necessary sounds also being cut, such as the soft decay sound of a piano

or guitar. To avoid this, set the Noise Gate to off via the following operation.

While holding down [FUNCTION], press the C#6 key repeatedly to toggle Noise

Gate on and off as needed.

Connecting Audio Devices ([AUX IN] jack, AUX OUT [L/L+R] [R] jacks)

NOTE

Use audio cables and adaptor plugs having

no (zero) resistance.

NOTE

The sound via the [AUX IN] jack is output

only from the right and left speakers, and

not from the center and rear speakers.

Audio cable

Audio signal

Phone plug

(stereo mini)

Phone plug

(stereo mini)

Instrument

Portable

audioplayer

Headphone jack

Default setting: ON

C#6

Highest key (C7)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

No comments

Yamaha N3X Owner's Manual Page 41