Yamaha CRW4260t-B Technical Information download pdf (Page 94)

Special Notes for OS 9 users:

● Pro Tools 5.0 or higher and DAE/DSI 5.0 or higher are required with Mac OS 9.0 or

higher.

● The Digidesign Control Panel requires OS 9.0 or higher

When using Digidesign Control Panel, turn off Platinum Sounds in the Appearance

Control Panel

● Firmware v1.1 required for Blue & White G3 computers running OS 9.0 or higher.

Available from Apple at: http://www.info.apple.com/kbnum/n58374

Known Issues:

1. The "Quicksilver" G4 models require OS 9.2, 9.2.1, or 9.2.2 to run Pro Tools. Users

should not attempt to install OS 9.1, or run OSX, (including Classic mode), with Pro

Tools on these machines. The Quicksilver G4 models have been tested with the Mac OS

as shippped from Apple on these machines, with a dual boot system which includes both

OS 9.2.x and OS X. It is absolutely necessary to boot from OS 9.2.x in order to run Pro

Tools. Although you cannot use Pro Tools with OS X or in "Classic" mode under

OS X, it is not necessary to remove OS X from these "Quicksilver" G4

computers.

2. Additional Mac OS Notes: Mac OS 9.2, 9.2.1, and 9.2.2 have only been tested with the

Quicksilver G4 models. Earlier models that do not require OS 9.2 have not been tested

for compatibility with Mac OS 9.2 or higher. In addition, you should not install OS X

on the same partition or hard drive with Mac OS 9.x that you use as your

startup drive for Pro Tools on pre-Quicksilver G4 models.

3. Pro Tools currently does not utilize the second processor in dual processor

Power Mac G4 models. If problems (such as -6042 errors) occur when using Pro Tools

on one of these machines, Digidesign recommends the following: Move the folder named

"Multiprocessing" from the System Folder "Extensions" folder to the "Extensions

(Disabled)" folder and restart.

4. On some G4 models running OS 9.2, 9.2.1 or 9.2.2, graphics in the Fades window may

appear in the wrong color, or the fade lines may be invisible. Clicking outside the Fade

window causes the window to redraw with the correct colors.

5. When running DigiTest v5.1.1 on the 867 MHz and 800 MHz dual-processor models,

DigiTest reports a configuration problem if the ATTO Express PCI DC is installed. An

erroneous error occurs when it scans the ATTO Express PCI DC (SCSI HBA card),

however the card passes if you continue the test. This problem does not occur when

running DigiTest on the 733 MHz model.

See Apple's tech archive on how to differentiate between AGP Graphics and PCI Graphics G4

models at: www.info.apple.com/kbnum/n58418

Power Macintosh version history and specifications are available at www.everymac.com and

www.applespec.com

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 241 242

No comments

Yamaha CRW4260t-B Technical Information Page 94