Yamaha CRW4260t-B Technical Information download pdf (Page 218)

Adaptec Power Domain SCSI HBA 2906 with the following requirements:

● Firmware v1.1

● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the Control Panel

● Current Adaptec drivers are available at:

http://www.adaptec.com/worldwide/support/driverindex.html

Previous drivers are available at: ftp.adaptec.com/mac/scsi/

— OR —

ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA, also

available in the Digidesign SCSI64 Kit) with the following requirements:

● ATTO ExpressPCI Firmware v1.4.4 f1

● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to 20 (10) and PCI Burst

Rate set to 32 bytes. Note: Mac OS 9.2 requires ATTO ExpressPro-Tools v2.7 or higher.

● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:

http://www.digidesign.com/download/ptutil.html

● ATTO ExpressPro-Tools is available at: http://www.attotech.com/software/

*Note: Use of a SCSI HBA card requires at least one PCI slot. Apple computers that do not

contain PCI slots, such as the G4 Cube, can not use a SCSI HBA card.

Firewire Drives

Although Firewire drives have not been tested by Digidesign with Pro Tools FREE, Digidesign has

enough confidence in the performance ability of the latest Firewire bridge technology, the Oxford

911 chipset, to inform Pro Tools customers that Firewire drives are an option when used with the

guidelines listed on the DigiDrive FireWire 80 Requirements page.

Digidesign Compatibility Documents Index

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 241 242

No comments

Yamaha CRW4260t-B Technical Information Page 218