Yamaha CRW4260t-B Technical Information Page 140

  • Download
  • Add to my manuals
  • Print
  • Page
    / 242
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 139
Available from Apple at: http://asu.info.apple.com/swupdates.nsf/artnum/n11533
ATTO ExpressPro-Tools v2.3.2 or higher required (supplied on Pro Tools v5.0.1 CD-ROM)
Note: Although not tested with Pro Tools III, Mac OS 9.2 requires ATTO ExpressPro-Tools v2.7
or higher, available at:
http://www.attotech.com/software/
External Floppy Diskette Drive
Although not required with Pro Tools installation, an external floppy diskette drive may be
required for some Plug-Ins installations. The following external USB diskette drives are currently
supported:
Imation SuperDisk
NewerTechnology uDrive
SmartDisk (VST) Floppy Drive (model FDUSB-M) Note: Information on VST brand
products from SmartDisk can be found at: www.smartdisk.com
Links to software and drivers are available in the Digidesign Support/Downloads/Utilities Section:
SmartDisk (VST) Floppy Drive (model FDUSB-M)
Imation SuperDisk
NewerTechnology uDrive
PACE USB Floppy Enabler
Apple's revised USB support allows for booting from a USB drive, therefore you should not boot
up your system with an authorization disk inserted in the USB Drive.
MIDI:
Both USB and serial MIDI interfaces work effectively with Pro Tools. Digidesign recommends
using a serial MIDI interface, as they offer the tightest possible MIDI timing. Serial MIDI
interfaces require either a Mac serial port or a qualified modem-to-serial port adapter.
Digidesign currently supports the GeeThree Stealth Port for G4 - AGP Video (Sawtooth), Stealth
Port for Dual Processor G4s or Griffin g4Port installed in the modem port (thereby not using a
PCI slot).
When using the GeeThree products with OS 9.0.4, version 1.0.3 or higher of the Stealth Port
extension is required, available here: http://www.geethree.com/download.html
Dual Monitor Display Card:
Digidesign has found only one configuration and card that appears to reliably achieve full Pro
Tools performance when two monitors are desired. The card is called the Jeronimo 2000 by
Appian. For information on installation, which must be followed very closely, and to download
the required Mac driver for this card click here: http://www.digidesign.com/download/appian.html
PCI Disk I/O, DSP Farm and SampleCell II Compatibility:
The PCI Matchmaker chip on a Disk I/O or DSP Farm must be rev QC or QE (check the end of
the line directly below “PCI Matchmaker” on the chip) to be compatible. Cards with rev Q chips
Page view 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 241 242

Comments to this Manuals

No comments