Yamaha CRW4260t-B Technical Information download pdf (Page 137)

Other Digidesign PCI Card Options - Pro Tools III

DSP Farm - PCI*: DSP Farms with serial numbers lower than FG10501 may be used for Plug-In

operation but do not support connection of an Audio Interface.

SampleCell II Plus

SampleCell II - PCI*

SampleCell II TDM Module - PCI

*Incompatibility with Disk I/O, older DSP Farms and SampleCell II Cards & The Blue & White G3

and G4:

A rev "QC" or later of the AMCC chip is required for Blue & White G3 and G4 compatibility. This

rev number appears on the AMCC chip following number "5933". Older versions can cause your

computer to hang while booting or when launching Pro Tools or DigiTest. QC or higher chip is

required for compatibility with the PCI 2.1 spec. Ways to identify these boards are in the grid

below:

Board S/N's Below Manufactured Before Board Rev Before

DSP Farm I - PCI FF09226 7/9/97 Rev H

Disk I/O - PCI FD06201 6/11/97 Rev D

SampleCell II - PCI HH02001 5/20/97 Rev D

If a customer has previously updated their board (or received a refurbished card), the serial

number will remain the same, but the board rev will be updated (and the AMCC chip will have

"QC" or later). Cards with the rev "Q" chip can be upgraded. Please contact Digidesign Technical

Support

to arrange for a return authorization. Registration is required.

Note: All SampleCell II Plus cards are newer, and therefore already have the compatible

chip.(The SampleCell II Plus cards are the same as the original SampleCell II PCI cards, but with

the included 32 MB of RAM soldered on the card)

Digidesign Compatibility Documents Index

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 241 242

No comments

Yamaha CRW4260t-B Technical Information Page 137