Yamaha CRW4260t-B Technical Information download pdf (Page 208)

Power Macintosh Beige G3 - Digi ToolBox XP Requirements

Beige G3 Processors of all speeds supported

Mac OS 9.0.4 required (OS 9.1 not tested with these models)

QuickTime 4.1.2 or higher required with Pro Tools v5.1.1 (QT v4.1.2 included with Mac OS

9.0.4, Pro Tools installation CD, or download the standalone

QuickTime 4.1.2 Installer from

Apple. QuickTime 5.0.2 is also qualified)

SCSI HBA Card NOT required: Although Pro Tools LE supports a full 24 tracks of record and

playback on a dedicated ATA/IDE hard drive, use of a SCSI HBA card with a SCSI drive can

increase some performance aspects of your system: for more information refer to the

Audio

Storage Requirements

page. Optional SCSI HBA cards bundled (by Apple) with Power Macintosh

computers are not compatible with this configuration due to the lack of NV RAM to store Pro

Tools desired SCSI transfer rate.

The following SCSI HBA cards are qualified for use with Beige G3s:

ATTO ExpressPCI SCSI HBA cards including:

● PSC (ExpressPCI Single Channel Ultra/WIDE HBA)

● EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA, also available in the Digidesign

SCSI64 Kit)

with the following requirements:

● ATTO ExpressPCI Firmware v1.4.4 f1

● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to 20 (10) and PCI Burst

Rate set to 32 bytes

● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:

http://www.digidesign.com/download/ptutil.html

● ATTO ExpressPro-Tools is available at: http://www.attotech.com/software/

— OR —

Adaptec Power Domain SCSI HBA cards including:

● 2906

● 2940UW

● 3940UW

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 241 242

No comments

Yamaha CRW4260t-B Technical Information Page 208